Scheppach HA3210 Industrial chip and dust extractor

More than a mere flavour of professionalism – that is the chip and dust extractor HA3210.

• Standards, directives and trends in modern fan and filter techniques were the basis for this products design. It is planned for connection to the large woodworking appliances used in your own workshop. It is thus very powerful. 2000 m3 of air completely purified and fed back to the work area. The large diameter of the hose – 140 mm – fits on the large machines but can also be adapted to all scheppach models via a reducer. A filter cartridge with a filter surface of 9.5 m2, available as an accessory, can further increase capacity.
• Painstaking though modest and guarded. The high performance obtained with a low power consumption, low noise level in a small volume due to its compact design. Two large wheels and two castors make the ha 3210 agile and easy to operate.

• Dimensions    1030x580x1860mm
• air capacity     2,000m3/h
• filter surface    1.65m2
• filter capacity   130litres
• hose length     2,500mm
• hose               140mm od
• weight             40kgs
• motor              1.4hp

• Safe and sturdy wheel base
• filter bag14
• BIA tested
• waste bag
• hose
• connection piece
• earthing set.

Dewalt

• All products are covered by one year warranty (XR Lithium Ion range has 3 years warranty when tool is registered online)
• Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Makita UK

• All products are covered by one year warranty
• Call us on 0800 032 6344 or email customerservice@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
• Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Festool

• All products are covered by Festool's extended 3 year warranty.
• Call us on 0800 032 6344 or email customerservice@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
• Product must have been registered online for the extended 3 year warranty (usually done by supplier)
• Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Trend

• All products are covered by one year warranty
• Call us on 0800 032 6344 or email sales@thesawcentre.co.uk and we will advise you of the repair proccess.
• Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Scheppach & Kity

• All products are covered by one year warranty
• Call us on 0800 032 6344 or email sales@thesawcentre.co.uk and we will advise you of the repair proccess.
• Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Mafell

• All products are covered by Mafells 3 year warranty when the product is registered online at www.mafell-garantie.de/login.jsp
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Stihl

• All Stihl petrol machinery is covered by one year warranty.
• All Stihl petrol machinery is checked & tested by engineer
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Bosch

• All products are covered by Bosch one year warranty. Customer can register product online at Bosch to recieve extended three year warranty.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Panasonic

• All products are covered by Panasonic's one year warranty.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Used Machinery

• All used machinery sold by The Saw Centre comes with no warranty.

Warranty does not apply where:
- Repairs are required due to wear & tear
- You or someone else has attempted the repair
- Tool has been abused
- Tool has been modified

For any other warranty quieries please call 0800 032 6344

Mainland UK

• Standard FREE delivery on orders over £100 (excludes heavier items)
• Next day delivery charged at £8.95 (excludes heavier items)
• Next day delivery before 10AM charged at £18.00 (excludes heavier items)
• £6.95 for orders under £100
• Heavier goods* carriage will be added at checkout

Non Mainland UK & Northern Ireland

• Standard delivery charged at £13.95 (excludes heavier items)
• For Heavier goods please call 0800 032 6344 for pricing as depends on location. Competitive pricing available.

Republic of Ireland

• Standard delivery charged at £18.95 (excludes heavier items)
• For Heavier goods please call 0800 032 6344 for pricing as depends on location. Competitive pricing available.

*some heavier goods may still have free delivery, this will be stated at checkout.

Please note:

• Standard delivery time is 1-2 working days providing goods are in stock.
• For next day delivery & next day before 10am orders must be placed before 3pm on working day.
• A saturday delivery is available. Please call 0800 032 6344 for price.
• Heavier goods pricing does not include industrial machinery. For price and availability of industrial machinery call 0800 032 6344.
• Stihl Machinery is available for collection only.

 Prices exclude VAT