Pertici Scarabeo 55 Cutting Centre

Automatic Cutting Centre for PVC window and door profiles, made of four different interconnected working units

• Product Brochure

AUTOMATIC BAR LOADING MAGAZINE
It consists in a welded sheet structure, composed of 6 bar supporting units moving the bars to the automatic pusher. Each support is composed of a moving device, with PU round section belts, controlled by a three-phase electric motor with a speed reduction gear.Max. loading capability is about 8-10 bars according to the dimension of the profile section. Emergency push button. 2 micro switches for bar presence monitoring in the automatic bar pusher
AUTOMATIC BAR PUSHER
Automatic bar pusher with controlled axis linear unit for the bar movement towards the cutting unit. It is powered by a Brushless motor with an epicycloidal reduction gear. Safety guards to cover the linear positioning unit.
CUTTING UNIT
Saw blade with a 500 mm standard diameter. 3 HP three-phase electric motor. Tilting support to cut at 135°- 90°- 45°. Automatic positioning device, which permits to have always the centre of rotation of the cutting unit matching the centre of the profile section and so to carry out wedge cuts automatically. 2 vertical pneumatic clamping kits and 2 horizontal pneumatic clamping kits. Automatic scraps evacuation system complete with:
Sloping plane connected to a rotating group. Compressed air blower. Prevision for conveyor belt for scrap and waste cuts evacuation system. Prevision for exhauster connection to the blade box. Compressed air gun. Complete safety guard for the working area. Safety guard with front door for inspections in the cutting zone, when necessary. Automatic device for cut bars unloading, with pneumatic control and vertical blocking cylinder to block and move the just cut piece.
AUTOMATIC UNLOADING AND STORAGE UNIT
Automatic piece unloading device, controlled by a pneumatic cylinder. Plane for storage of cut pieces. Safety guards to cover the moving parts.

ELECTRONIC CONTROL SYSTEMS

HARDWARE
Industrial computer. 10,4” LCD TFT colour monitor. Hard disk. Touch-sensitive keyboard. 1,44 Mb floppy disk driver. PLC for management of working cycle.
SOFTWARE
Manual control of every function from monitor. Storage of profile data. Viewing and/or editing cutting lists. 400 Character stored in 25 different fields for each piece. Reception of cutting lists from floppy disk in ASCII format. Cutting lists and profile data almost unlimited. Optimising cutting lists. Symmetrical profile cutting (two pieces with 3 cuts, no waste). Creation and editing of label, with choice of format and font size. Off-cut reuse management. Label with single reference for each off-cut (for easy storage). Off-cut reuse on cutting centre and on external saw (creating labels). Correction of cutting length for welding, settable from function SETUP.Correction of “BAR HEIGHT” settable for each stored profile. Remote assistance via modem (active only if a modem is available). Timing and statistic facility to export production data into Excel format (weekly report and monthly report). Self-diagnostic facility linked with instruction manual trouble shooting.

Dewalt

• All products are covered by one year warranty (XR Lithium Ion range has 3 years warranty when tool is registered online)
• Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Makita UK

• All products are covered by one year warranty
• Call us on 0800 032 6344 or email customerservice@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
• Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Festool

• All products are covered by Festool's extended 3 year warranty.
• Call us on 0800 032 6344 or email customerservice@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
• Product must have been registered online for the extended 3 year warranty (usually done by supplier)
• Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Trend

• All products are covered by one year warranty
• Call us on 0800 032 6344 or email sales@thesawcentre.co.uk and we will advise you of the repair proccess.
• Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Scheppach & Kity

• All products are covered by one year warranty
• Call us on 0800 032 6344 or email sales@thesawcentre.co.uk and we will advise you of the repair proccess.
• Please keep your TSC reciept as proof of purchase must be produced.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Mafell

• All products are covered by Mafells 3 year warranty when the product is registered online at www.mafell-garantie.de/login.jsp
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Stihl

• All Stihl petrol machinery is covered by one year warranty.
• All Stihl petrol machinery is checked & tested by engineer
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Bosch

• All products are covered by Bosch one year warranty. Customer can register product online at Bosch to recieve extended three year warranty.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Panasonic

• All products are covered by Panasonic's one year warranty.
• For any other information regarding warranties please email customerservice@thesawcentre.co.uk

Used Machinery

• All used machinery sold by The Saw Centre comes with no warranty.

Warranty does not apply where:
- Repairs are required due to wear & tear
- You or someone else has attempted the repair
- Tool has been abused
- Tool has been modified

For any other warranty quieries please call 0800 032 6344

Mainland UK

• Standard FREE delivery on orders over £100 (excludes heavier items)
• Next day delivery charged at £8.95 (excludes heavier items)
• Next day delivery before 10AM charged at £18.00 (excludes heavier items)
• £7.30 for orders under £100
• Heavier goods* carriage will be added at checkout

Non Mainland UK & Northern Ireland

• Standard delivery charged at £13.95 (excludes heavier items)
• For Heavier goods please call 0800 032 6344 for pricing as depends on location. Competitive pricing available.

Republic of Ireland

• Standard delivery charged at £18.95 (excludes heavier items)
• For Heavier goods please call 0800 032 6344 for pricing as depends on location. Competitive pricing available.

*some heavier goods may still have free delivery, this will be stated at checkout.

Please note:

• Standard delivery time is 1-3 working days providing goods are in stock.
• For next day delivery & next day before 10am orders must be placed before 3pm on working day.
• A saturday delivery is available. Please call 0800 032 6344 for price.
• Heavier goods pricing does not include industrial machinery. For price and availability of industrial machinery call 0800 032 6344.
• Stihl Machinery is available for collection only.

 Prices exclude VAT