SCM Nova TF 110 Fixed Spindle Moulder. Guaranteed quality at your finger tips. Easy-to-use with high productivity, efficiency and flexibility.

Advantages

Set up precision and reliability
The operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine.

Spindle moulder fence with mechanical programming
Maximum set-up speed and ease-of-use. No more test runs due to digital readouts that ensure accuracy to a tenth of a millimetre in positioning the two worktables.

Preconfigured Versions

• 55.50.59: "TL" version with tenoning carriage complete with:
  
  • eccentric clamp,
  • telescopic tilting fence with 4 positioning and reference stops for programming of workpiece
    length,
  • 1 anti-splinter device on fence with reference stop,
  • 1 infeed table extension complete with adjustable front support bar for large workpieces,
  • tenoning hood with exhaust hood,
    
    • with spindle from 30 to 35 mm, max tool diameter 300 mm
    • with spindle from 40 to 50 mm, max. tool diameter 350 mm,
  • emergency pushbutton,
  • operator arm protection,
  • microswitches for control and limit of 3000/4500 rpm during tenoning operations.
  • 7kW 50hz (8kW 60hz) motor power with automatic star-delta start
    
    • 7kW 9,5HP 50hz (8kW 11HP 60hz)

Standard Equipment

• Manual tool-holder shaft lifting, complete with mechanical readout of working height
• Adjustable fence with wooden tables complete with exhaust hood and connecting wooden table (maximum tool diameter 250mm)
• Electrical presetting for feeder (CE version)
• Electric speed display dial 
• Three phase motor with direct motor start: 5kW (7hp) 50Hz
• Reverse spindle rotation with electrical interlocking for reverse operation
• 3000 / 4500 / 6000 / 7000 / 10000 rpm spindle speeds

Safety Equipment

• Spindle protection for shaping operations (160 mm max. tool diameter) (CE version)
• Emergency pushbutton
• Safety microswitches on spindle locking (CE version)
• Safety microswitch on motor access door
• Padlockable main switch
• Overload switch protection
• Auxiliary low voltage circuit (110 volt)
• Automatic brake on main motor (CE version)
• Certificate of conformity "C.E. standards" (CE version)

Technical Specification

• Worktable dimensions: 1200 x 730 mm
• Spindle base projection from worktable: 5 mm
• Spindle base projection from worktable with Interchangeable spindle: 33 mm
• Max. useful spindle length: 140 mm / 5.5 inches
• Spindle speed (at 50 Hz): 3000 / 4500 / 6000 / 7000 / 10000 rpm
• Max. diameter of the profiling tool: 250 mm / 9.8 inches
• Max. tool diameter retractable under the table at 90°: 320 x 85 mm
• Max. diameter of the tenoning tool with spindle diameter 30-35: 300 mm / 11.8 inches
• Motor power: 5kW (7hp) 50Hz

Optional Extras

• 57.00.76: Spindle moulder fence with mechanical adjustment. Spindle moulder fence with continuous linear adjustment by handwheels accessible from the front of the machine:
  
  • adjustment of entire fence in respect of tool diameter
  • adjustment of entry fence for thick removal
  • mechanical readout for the adjustment
  • wooden tables and connecting plate
• 57.01.45: Aluminium tables instead of wooden tables for fence
  with connecting bars between the two tables
  
  • N.B.: Not available with the fixed spindle moulder fence
• 57.01.41: * "LL" version with 2 cast-iron profiling extensions
  complete with:
  
  • extensions of worktable on left and right hand side for a total worktable length of 2500 mm
  • extractable front extension
  • emergency pushbutton
• 57.01.44: * Carriage on fixed table for small tenoning operations
  complete with +-60° swivelling fence with mobile stops, elescopic extension and eccentric clamp. 250 mm maximum tool diameter with standard profiling fence.
• 57.01.48: MK4 Interchangeable spindle
• 57.01.47: Spare spindle (for MK4 interchangeable spindle)
  
  • N.B.: It is available only with code 57.01.48
• 57.02.90: MK4 right tool taper, complete with ring and collet
  complete with ER 32 type clamp, 1/2” diameter
• 57.02.91: MK4 left tool taper, complete with ring and collet
  complete with ER 32 type clamp, 1/2” diameter
• 57.01.95: * 1300 / 3000 / 4500 / 6000 / 9000 rpm spindle speeds 
• 57.01.56: Three-phase motor 7kW (9.5hp) 50Hz with automatic star-delta starter

Note: Options marked with * are not available for preconfigured machines