Kingsland Multi 80 Hydraulic Steelworker with 5 Workstations
Kingsland Multi 80 Hydraulic Steelworker with 5 Workstations this 80-ton machine are in the Kingsland tradition of well-engineered, robust steelworkers, built for a long working life. These universal machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted hold downs at all five workstations to safely control the operations. Comprehensive safety guards are fitted as standard on all workstations. Free standing on a suitable floor, they just require electrical connection to be ready for work. For two operator utilisations, the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch stations. The system gives accurate power inching at all five workstations and allows the machine to be stopped at any position giving safe accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations. Centralised lubrication is metered by one-shot system, being only one feature of the low maintenance requirement.
The large punch bed area has a removable front block and is designed to give a very wide range of punching applications. A punch table with rules and guides for repetition work are fitted as standard equipment.
This station provides large capacity angle cutting at 90° and 45°. Angles between 45° and 90° can be achieved by first cutting at 90° and then flange trimming to the required angle in the shearing station.
Section Cutting Station
The machines are fitted as standard with blades for cutting round and square bars. With extra equipment, the machines are able to cut, in this aperture, channel, joist, T-section and many other special profiles
The shearing unit is fitted with a simple robust hold down which is adjustable to any thickness of material within the cutting capacity of the machine. The shear feed table with adjustable guides is fitted to allow accurate feeding of materials. The guide can be adjusted to allow mitre cutting up to 45° for flat bars or to trim the flanges of angle.
The notching station is fitted as standard with a rectangular notch table with adjustable back stops, allowing repetitive positioning.
- Maximum Capacity: 28 x 20mm
- Diameter x Thickness: 57 x 10mm
- Stroke Length: 55mm
- Standard Throat Depth: 305mm
- Deep Throat Model: 625mm
- Largest Hole - Std. Equipment: 57mm
- Largest Hole (Optional) (*): 160mm
- Maximum Section: 305mm
- Working Height: 1090mm
- Flat Bar - Max. Thickness: 300 x 20mm
- Flat Bar - Max. Width: 450 x 15mm
- Angle Flange Trim - Max. 45°: 100 x 15mm
- Working Height: 890mm
- 90° Cut: 150 x 13mm
- 45° Mitre (True Int./Ext.): 70 x 10mm
- Working Height: 1155mm
- Round/Square: 45mm
- Channel/Beam (**) (*): 10 x 65mm
- Tee (**) (*): 90 x 12mm
- Material Thickness: 12mm
- Width – Rectangle: 40mm
- Depth – Rectangle: 90mm
- Depth - Vee (*): 60mm
- Angle Flange - Max. Profile: 100 x 10mm
- Working Height: 890mm
Corner Notch (*)
- Maximum Capacity: 250sq x 2mm
- Bar Bend. Max. Capacity: 250 x 12mm
- Sheet Bend. Max. Capacity: 500 x 3mm
Punching At Notch Station (*)
- Throat Depth: 125mm
- Maximum Capacity: 38 x 7mm
- Motorpower: 7,5kW
- Net Weight - Std. Throat: 1925kg
- Gross Weight - Std. Throat: 2095kg
- Machine Dim. (L x W x H): 176 x 71 x 183cm
- Packed Dim. (L x W x H): 191 x 86 x 200cm
Illustrations, dimensions, weights... are not binding as designs are constantly being reviewed.
(*) optional equipment
(**) other profiles are also possible