Laguna 14/BX Bandsaw 14 inch 1800W 2.5HP 240V 1 Phase
Laguna 14/BX 14" Bandsaw has a similar specification to the 14/12 model but with a more powerful 2.5hp motor, twin extraction ports and solid one-piece frame constructed using a heavier gauge steel. A foot switch and disc braking system has also been added to more conveniently stop the saw and bring the motor to a virtually instantaneous rest. The premium build quality, large depth of cut and outstanding features will appeal to professional joinery workshops.
Laguna 14/BX Bandsaw 14 inch 1800W 2.5HP 240V 1 Phase
Building upon the success of the 14/12 model, the 14/BX has a similar specification but with a more powerful 2.5hp motor, twin extraction ports and solid one-piece frame constructed using a heavier gauge steel. A foot switch and disc braking system has also been added to more conveniently stop the saw and bring the motor to a virtually instantaneous rest. The premium build quality, large depth of cut and outstanding features will appeal to professional joinery workshops.
These high-end features include a pyramid shaped spine that minimises any frame distortion when the blade is fully tensioned, ensuring cutting accuracy.
One of the most distinctive advantages of the Laguna bandsaw range over all other brands is the famous ceramic blade guide system. They create 10 points of contact on the blade allowing easy set up and highly accurate cuts even when re-sawing deep timber. Using long life ceramic guides allows for a much larger blade contact area than traditional bearing guides. The result is more support for the blade and greater cutting accuracy.
The braked motor provides enough power to operate at the full 13” cutting depth. There is a quick blade release tension lever that makes blade changing faster and this is complimented with an easy to view blade tension scale indicator to easily ensure correct tension set up.
The micro polished cast iron table is mounted onto an oversized double cast iron trunnion with two locking points that ensure there is a solid surface to work from. The table tilts to 45 degrees with a positive Stop at 90°. A flip plate allows reverse tilt up to 7 degrees when required. In the centre of the table is an anodised aluminium throat plate with 4 adjusting screws to ensure a perfect flush fit.
The parallel fence runs smoothly along a polished solid steel bar. The locking screw is fitted with a brass end to ensure a positive lock which will not let you down and creep during repeat work. The measuring scale is marked in both Inches and MM. The rigid aluminium high/low fence ensures full and precise timber support for both large and small work pieces.
Solid cast iron wheels are electronically / dynamically balanced & fitted with polyurethane one-piece tyres designed to run cooler & last longer than conventional tyres. The worm gear & pinion on the blade guard is ultra-smooth and engineered to have minimum flex even when fully extended.
Double windows allow you to check both tension & tracking while the machine is running. There is a premium anodized aluminium throat plate with fine adjustment for ultimate accuracy.
The 14/BX is fitted with a foot operated disc brake system. Pressing the foot pedal firstly cuts power to the motor and secondly activates the disc brake to bring the saw to a virtually instantaneous stop.
Efficient dust extraction is achieved by using two x 100mm (4") diameter outlets. One is located just underneath the table with a deflector that sends the dust into the collection port, before it comes into contact with the lower wheel and other moving parts - extending their lifespan. The second is located in the more traditional place at the base of the cabinet.
Specifications
- Part Number: 14/BX
- Motor (Induction): 1800w (2.5hp)
- Power Supply: 220-240V / 50Hz / 1 phase
- Maxmimum Cutting Depth: 330mm (13")
- Wheel Size (Cast Iron): 355mm (14")
- Throat Width: 340mm (13.6")
- Maximum Cutting Width With Fence: 310mm (12")
- Fence Height (Hi/Lo): 140mm / 12mm (5.5" / 0.5")
- Table Size (Cast Iron): 400mm x 546mm (16" x 21.5")
- Table Tilt: -7 degrees to +45 degrees
- T-Slot For Optional Mitre Guide: 19mm to 25mm (3/4" to 1")
- Blade Length: 2921mm (115")
- Minimum Blade Width: 3mm (1/8")
- Maximum Blade Width: 19mm (3/4")
- Blade Guide (Above and Below Table): Laguna 5 Piece Ceramic
- Recommended Breaker Size: 16 Amp
- Power Cable: 1.8m with UK 3 pin plug
- Dust Collection Outlets: 100mm (4") x 2
- Floor To Table Height: 965mm (38")
- Weight (net / ship): 123kg / 150kg
- Assembled Dimensions (WxDxH): 755mm x 713mm x 1790mm
- Shipping Dimensions (WxDxH): 1860mm x 660mm x 640mm
- Manufacturers Warranty: 1 Year
MPN | 14/BX |
---|---|
EAN Barcode | 640213052375 |
Manufacturer | Laguna |
Voltage | Single Phase Voltage (220 - 240V) |
UK Mainland Delivery
We try our best to dispatch all stock orders same day on a on a next day service. Dispatch times may vary depending on your geographical location and items ordered.
For full terms and conditions please visit our Delivery & Returns page.
Standard* delivery via courier is free for orders over £50 ex vat and under 30kg in weight.
Orders under £50 ex vat and 30kg in weight are subject to a standard* £5.83 ex vat handling and packaging fee.
Stock orders received before 12pm Monday to Friday will be processed and dispatched the same working day. Orders received after 12pm Monday to Friday will be processed and dispatched the next working day (excludes weekends). Standard delivery via courier is free for orders over £50 ex vat and under 30kg in weight. Orders under £50 ex vat and 30kg in weight are subject to a standard £5.83 ex vat handling and packaging fee. Orders over 30kg will be subject to courier or volumetric surcharges.
Orders sent direct from our suppliers are dispatched in accordance to supplier delivery terms.
Laguna: 2 - 3 days, delivery to UK mainland only. A Laguna rep will contact you by phone to arrange delivery that suits you.
Holzmann, Scheppach, Zipper and SIP: 2 - 3 days, delivery to UK mainland only, for Highlands and Islands a delivery surcharge may be applicable, call us on 0141 429 4444 to enquire before you order.