Laguna REVO 24/36 Lathe 2200W 3HP 240V 1 Phase

Sharing all of the outstanding features of the bestselling 18/36REVO, the bigger version increases the bowl turning capacity to a massive 24" diameter over the bed.

One of the striking features of the Laguna REVO 24/36 lathe is an ergonomic panel with controls mounted in an anodized aluminium plate. The speed is smoothly controlled with a tactile rubber augmented knurled aluminium dial. Add the blue hue of the speed indicator and this machine stands out from the competition. In addition to the headstock control panel, the Laguna REVO 24/36 has a secondary control panel which you can choose to mount onto the right-hand end of the bed or onto the tailstock.

The solid bed, with an impressive width of 208mm, is made of high-quality steel ASTM A36 (tougher than cast iron) and is precisely ground providing smooth travel of the headstock, tailstock and tool rest. The spindle is run by a highly efficient induction motor with a VFD frequency convertor for high torque even at lower speeds. The speed range can be changed with a clever one-lever mechanism.

The headstock, tailstock and tool rest of the lathe are made from cast-iron securing minimum vibration and high comfort for turning of over sized pieces. Tailstock and Headstock cam lock levers are placed on the back of the machine and will not get in the way. All cam lock levers have soft grip handles and a long length resulting in a firm feel with no deflection.

A redesigned banjo features more compact design, 45˚ cut out, wider base, increased eccentric rod diameter and larger hanger resulting in a more solid feel when locking in place.

The cast iron floor stand has had the material thickness increased by 80%, over the 18/36REVO, to handle the extra weight and stability requirement.

A further upgrade is the front bearing which has a 30% higher load rating than the standard bearing. 

Supplied With

• 2MT four prong drive centre.
• 2MT revolving tail centre.
• 75mm (3") diameter faceplate.
• knock-out bar.
• onboard storage for accessories.
• 1.8m power cable with UK 3 pin plug.

Features:

• The basic dynamic load rating is 30% higher than a 6207-ball bearing.
• Wall thickness of legs has been increased 80% over the Revo 18|36.
• Remote Control Box w/Speed Settings.
• Two Ergonomic Control Panel Positions: High/Low.
• Drive Belt: Poly-Groove with EZ Access.

Specifications

• Part Number: 24/36REVO
• Motor (Induction): 2200w (3hp) 3 phase output
• Power Supply: 220-240v / 50Hz / 1 phase
• Recommended Breaker: 16 Amp
• Swing over bed: 600mm (24")
• Swing over Banjo: 490mm (19.5”)
• Swing with optional Expansion Set: 800mm (32")
• Distance between centres: 910mm (36”)
• Between centres with optional Expansion Set: 1410mm (56”)
• Speed Range – Low: 50-1300 RPM
• Speed Range – High :135-3500 RPM
• Drive Belt: Poly-Groove Drive Belt with quick change
• Tool rest Length: 305mm (12")
• Tool Rest Stem Diameter: 25.4mm (1”)
• Tool Rest Leading Edge: Hardened Steel
• Headstock Spindle Taper: 2MT
• Headstock Spindle Thread: M33 x 3.5mm (Right Hand)
• Headstock Spindle Through Bore: 9.5mm (3/8”)
• Headstock Spindle Indexing: 14/36/48 positions with Lock
• Headstock Front Bearing: TPI Taiwan 6207LLU
• Headstock Rear Bearing: TPI Taiwan 6205LLU
• Tailstock Taper: 2MT
• Tailstock Quill Travel: 114mm (4.5”) Self Ejecting
• Tailstock Through Bore: 9.5mm (3/8”)
• Faceplate Diameter: 75mm
• Floor to Spindle Centre: 1130mm (44.5")
• Assembled Dimensions (WxDxH): 1524mm x 660mm x 1327mm
• Shipping Dimensions (WxDxH): 1540mm x 690mm x 650cm
• Weight (Net /Ship): 254Kg / 266Kg
• Manufacturers warranty: 1 Year