Lamello 145028 E20-H Self-clamping Element 400 Pieces

The E20 is a self-clamping connector that is used with every Lamello biscuit joiner. For a surface connection using the E20-L, the two workpieces are joined in the desired position, but with the rear side facing up. When the workpieces are clamped, the Lamello groove is made along both workpieces so that both parts each have half of the groove. The edges are then coated with adhesive and the workpieces are assembled. The E20-L is then tapped into the 4 mm groove of the two workpieces with a few hammer blows and the lateral ribs anchor in the groove sides. Due to the inclined course of these holding ribs, the workpieces are clamped together at the same time during insertion. The E20-H variant is designed for milling in edges, such as for joining a kitchen base or carcass. The installation of the E20-H connector is the same as for the E20-L, except that the milling takes place in the workpiece edges or the mitres. Since both E-20 variants can be used with any groove cutter, it is advisable to keep a package of each in the assembly vehicle. This means that the connecting fitting serves as the perfect gluing aid on the construction site when clamps or other aids are not available. There is no need to wait for the glue to dry. An assembled workpiece can be further processed straight away.

Applications

• Fixed wood joints at different angles in carpentry work
• Fast clamping of workpieces when the back is not visible
• Connection solution on construction sites without clamps
• The E20-L is used for surface connections and is ideal for picture frames, plinths or panel extensions
• The E20-H for edge connections: cabinet or base connections

Features

• Self-clamping leement in size 20 for gluing
• Connects and tensions the joint when hammered into the 4 mm groove
• Two versions for surface or edge connections
• Efficient machining thanks to simultaneous cutting of both workpieces
• Ideal for picture frames, plinth extensions, connection solution on the construction site
  
  
• Connects and clamps: Connects and tightens when hammered into the workpiece due to the shape of the lateral ridges
• Simultaneous groove cut: Efficient machining thanks to simultaneous cutting of both workpieces
• Perfect fit: The precision of the joining elements and of the 4 mm groove lead to a perfect fit
• Symmetrical: The identical groove in both workpieces
• Low cutting depth: Minimal cutting depth

Technical Specification:

• Installation tolerance longitudinal: ± 1 mm
• Installation tolerance radial: ± 0 mm
• Minimum workpiece width: 36 mm
• Minimum material thickness for edge cuts: 8 mm
• Minimum material thickness for angle bisector: 14 mm
• Adjustment Lamello-System: S
• Size (L x H x W): 23 x 28 x 4 mm