View your shopping bag ›

My Account

  • Items. (0)
  • £0.00 (ex. VAT)

Checkout

PEGAS 230 x 280mm SHI LR Semi Automatic Bandsaw Machine

    MPN: n/a

    TSC: n/a

PEGAS
Secure Payment
  • 100% Secure
  • Item In Stock
  • Next Day Delivery

Semiautomatic machine with hydraulic manipulation. The machine is designed for cutting of material in vertical and angle cuts, angle cuts are possible to set fluently from 60° right to 45° left. 

It is suitable for piece production and small series production. Thanks to its robust construction it enables cutting of wide range of profiles and full materials.

Control system:

Controller with PLC MITSUBISHI features an automatic feed control BRP.

Control panel MITSUBISHI as standard equipment. It uses touch display and PLC, which enable semi-automatic cutting (basic setting included) as well as communication with operator.

Detailed Controller Display: 

  • Cutting cycle indication,
  • indication BRP, 
  • indication – blade tightening,
  • time of the cut, 
  • loading of blade in amperes, 
  • speed of the blade, 
  • cutting times measuring, 
  • list of error messages.

User settings:

  • autostop of hydraulic unit
  • mode of arm moving after end of the cut
  • mode fast moving of the arm
  • mode time lag of shift speed
  • mode blade moving
  • mode jaw moving after cutting cycle finish
  • diagnostic of inputs and outputs

STOP function – cutting : it enables to stop cutting by pressing STOP button at any time. The Frame goes up with the running blade without opening the vice.

Regulation of shaft speed (moving to cut) is manual and uses throttle valve placed beside control panel. Automatic (safety) regulation of shift speed PEGAS BRP. Principle: Machine will stop after exceeding set loading (defined in ampers).

The ergonomical control panel is mounted on the movable console. The control panel is equiped with mechanical buttons and digital display of the machine control system. Mechanical buttons controls basic saw movements (arm, vice) and cutting cycle start. The safety button is present on the panel aswell. All buttons are highly resistant in anti-vandal version.

Construction:

The machine is designed so that it corresponds to standard exertions in productive conditions. That is why all carrying parts are made as cast-iron castings (solidity, absorption of vibrations and stops). Parts of arm, vice and turn table is cast iron.

  • The arm of the machine is made of cast iron and it is designed to ensure the power and the precision of the cut. Arm is 25 degrees sloped, it increases the lifetime of blade.
  • The arm rotated by a shaft (joint) which is support by adjustable conical bearings
  • Drive pulley and tighten pulley are both metal castings.
  • Upper working arm position controlled by automatic stopper (DPP)
  • The down working position of the arm controlled by the microswitch. In the end position microswitch is on, arm goes to selected upper position.
  • The vice is made from cast iron. Jaws ensure safe clamping of the material.
  • The hydraulically operating vice with short travel is placed in an adjustable dovetail groove.
  • Moving jaw of the vice is manual with a wheel and trapeze thread.
  • Basic part of the vice moves according to the direction of the angle cut setting, fixation is made by the handle.
  • Turn table is cast iron. A turntable gives a big place for support of material and its perfect clamping.
  • Manual turning of the table for angle cuts, angle fixation using quick clamping lever.
  • General angles are adjusted by the nonius (vernier scale).

Basic equipment of machine:

  • The blade leading in guides with hard metal plates and leading bearings and along cast iron pulleys.
  • There is a guide situated on the firm beam on the drive side. On the tightening side there is the guide situated on the moving beam.
  • The guide beams of moving band guide is adjustable in whole working range. Manual adjustment and fixing of the guide beams.
  • Guide holder moves in adjustable dovetail groove.
  • The saw-band is equipped with a guard, which protects the operator from millings and cutting emulsion.
  • Mechanic tightening of the blade.
  • Automatic indication of blade tension.
  • A passive driven cleaning brush for perfect cleaning and function of blade.
  • Drive of machine is solved by worm gear box with no maintenance oil filling. Three-phase electric motor with double winding, with a frequency converter for a fluent regulation of the blade speed from 20 to 100 m/min. Sturdy flange with shaft. Thermo-protection of engine.
  • The cooling system distributes cutting emulsion to the band guides.
  • Massive base with a tank for chips. Base is designed for manipulation manipulation with machine by pallet truck and also by any height lift truck.
  • Indication of blade tightening and opening of the cover.
  • Controlling 24 V.
  • Machine is equipped with hydraulic system which controls all functions of that machine. It pushes the arm to cut, pulls up the arm and opens and closes vices.
  • Measuring end stop.
  • Band saw blade.
  • Set of spanners for common service.
  • Manual instructions in electronic form (CD).

Operating cycle: 

After manual adjustment of the jaws the operator starts the cycle with a switch on the control panel. The hydraulic cylinder of the vice grips the material and the saw starts working. The cutting speed of the arm is controlled by a throttle valve. Arm and vice movements after cut finish following set user parameter. The vice opens and the operator can handle the material.

Dewalt

  • All products are covered by one year warranty (XR Lithium Ion range has three years warranty when tool is registered online)
  • Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Makita UK

  • All 18 Volt products range are covered by three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Festool

  • All products are covered by Festool's extended three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Product must have been registered online for the extended 3 year warranty (usually done by supplier)
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Trend

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Scheppach

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Mafell

Stihl

  • All Stihl petrol machinery is covered by one year warranty.
  • All Stihl petrol machinery is checked & tested at the point of purchase.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Bosch

  • All products are covered by Bosch one year warranty. Customer can register product online at Bosch to receive extended three year warranty.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

For any other warranty queries please call 0141 429 4444

DELIVERY:

We aim to deliver every parcel within 48 hours from the date of ordering. Most of the time you will receive your parcel the following day if ordered before 2:30pm but sometimes things are outwith our control (traffic, road accidents, bad weather etc.) in these circumstances we ask that you be patient with us, if your delivery is late please call us and we will investigate the situation for you. Most parcels will be delivered by Parcelforce and may require a signature upon delivery.

We deal with many stockists and sometimes we rely on their delivery times to fulfil your order, we take every care to ensure that your product is delivered within the time stated we take no responsibility for third parties and will incur no liability for any late delivery. If you have any questions or concerns regarding the delivery of an item please call us.


Mainland UK

  • Standard FREE delivery on orders over £80 + vat (excludes heavier items)
  • £7.30 + vat for orders under £80 + vat
  • Heavier goods* carriage will be added at checkout


Non Mainland UK & Northern Ireland

  • Standard delivery charged at £14.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as this depends on geological location. Competitive pricing available.

Please note:

  • For price and availability of industrial machinery call 0141 429 4444 or fill out the contact form.
  • Stihl machinery is only available for collection only.
  • Prices exclude VAT by default but you can change this by clicking on the VAT switcher at the top of the page if you want to see prices including VAT.

*Some heavier goods may still have free delivery, this will be stated at checkout.


RETURNS:

Terms and Conditions

  • In the unlikely event that an item does not meet your expectations or is faulty or damaged when you receive it, you can obtain a replacement or full refund – provided the product is returned unused in its original packaging and includes any accessories provided as well as any items provided free of charge or as part of a package deal within 14 days of your purchase. Your statutory rights are not affected. Goods must be returned at customer’s expense unless otherwise agreed with a Saw Centre employee.