The Ozgenc Makina OMRM 105 Automatic Profile Glazing Bead Cutting Saw is designed for cutting aluminium profile glazing beads.

Advantages

HIGH-SPEED CUTTING SETS
There are four HSS (high-speed steel) saws with the diameters of 120 mm and 200 mm.

PERFECT CUTTING ANGLES
The two-sided 45° angled cutting system helps cutting the lower tab of any lath, along with it.

MECHANICAL CALIPER 
This helps measuring the length and height of the lath profiles on the frame without using meters. (Optional)

Features

• Cutting range +45° / -45°
• Two fixed, opposed blade motors on the mobile carriage set at 45° to the workpiece support surface
• 4 cutting saw blades HSS (High Speed Steel)
• Vertical pneumatic clamping system
• Setting handle for easy mould adjustment
• Adjustable cutting speed with regulator on control panel
• Double cutting in one time
• The machine is standard equipped with completed bearing and measuring conveyors (2 and 2.4 metres long each)
• Particular care has been taken over the safety measures, both mechanical and electrical
• Power supply protects system from voltage overload

Optional Equipment

• Portable mechanical calliper for quick measurements up to 2050mm

Technical Specifications

• Power Supply: 380-400 V, 3 ph, 50-60 Hz
• Spindle speed: 3000 rpm
• Total kW: 1.5 kW
• Air pressure: 6-8 Bar
• Air Consumption: 25 lt/min
• Machine Height: 1170 mm
• Machine Length: 5400 mm
• Machine Width: 900 mm
• Machine Weight: 140 Kg
• Saw Outside Diameter: 200 mm (Taube), 120 mm (Small Saw)
• Inside Diameter of Saw: 32 mm (Taube), 22 mm (Small Saw)
• Saw Thickness: 1.8 mm (Taube) 3 mm (Small Saw)
• Number of Teeth: 160 mm (Taube) 80 mm (Small Saw)
• Machinable Minimum Profile Length: 300 mm
• Machinable Maximum Profile Length: 2550 mm
• Maximum Profile Height: 27 mm