Ozgenc Makina TM 4 Reinforced Steel Profile Cutting Machine

The Ozgenc Makina TM 4 Reinforced Steel Profile Cutting Machine is designed for cutting the reinforced steel profiles.
The Ozgenc Makina TM 4 Reinforced Steel Profile Cutting Machine is designed for cutting the reinforced steel profiles.
Advantages
EFFICIENCY IN PRODUCTION
The custom-made eccentric system in the clamp is equipped with a support system that helps to have a standardized cut in any size once the material is set just for once.
Features
- Ability to choose between 2 cycles (rpm) for cutting different materials.
- Emergency stop button
- Motor protection circuit for the motor and liquid pump
- Cooling fluid circulation system
- Adjustable jaw for clamping the profile nearest as possible to the saw.
- Moving saw protection cover
- Special clamping system for adjusting a measurement once and continuing cutting the same length continuously without measuring again.
- Able to cut 45° towards both directions.
- Operating arm works with (24V) electricity for worker safety.
Technical Specifications
- Power Supply: 380-400 V, 3 ph, 50-60 Hz
- Motor Kw: 3 kW
- Air pressure: 6-8 bar
- Air Consumption: 20 lt/min
- Machine Height: 1700 mm
- Machine Length: 800 mm
- Machine Width: 1100 mm
- Saw Outside Diameter: 275 mm
- Inside Diameter of Saw: 32 mm
- Number of Teeth: 102
- Machine Weight: 220 Kg
- Minimum Support Sheet Cutting Thickness: 6 mm
| Country of Manufacture | Turkey |
|---|---|
| Manufacturer | Ozgenc Makina |
UK Mainland Delivery
We try our best to dispatch all stock orders same day on a on a next day service. Dispatch times may vary depending on your geographical location and items ordered.
For full terms and conditions please visit our Delivery & Returns page.
We have strived to maintain the lowest possible prices for delivery for our customers that we can, however rising courier costs have made this near impossible and these costs now exceed what we are charging. So for the first time in four years we are raising our delivery cost from £5.83 ex vat to £7.00 ex vat. We are also raising our minimum order value for free delivery from £50.00 ex vat to £75.00 ex vat. We hope that this does not affect your decision to purchase from our website, you will always receive the same high level of service that we offer all customers.
Stock orders received before 12pm Monday to Friday will be processed and dispatched the same working day (this excludes items that are made to order or sent direct).
Orders received after 12pm Monday to Friday will be processed and dispatched the next working day.
Standard delivery via courier is free for orders over £75.00 ex vat and under 30kg in weight.
Orders under £75.00 ex vat and 30kg in weight are subject to a standard £7.00 ex vat handling and packaging fee.
Orders over 30kg will be subject to courier or volumetric surcharges.
Orders sent direct from our suppliers are dispatched in accordance to supplier delivery terms.
| Supplier | Estimated Delivery Times |
|---|---|
| Laguna | 2 - 3 working days for light items, 7 - 10 working days for heavy items |
| Charnwood | 2 - 3 working days, Charnwood will contact you to arrange delivery |
| Mirka* | Wide Belts - Manufactured to order: 7 – 10 working days |
| SIA Abrasives* | Wide Belts - In stock belts: 2 - 3 working days Wide Belts - Manufactured to order: 7 – 10 working days Wide Belts - Out of stock belts: 4 - 6 weeks |
| Swedex | 1 – 2 working days for in stock products |
| Trend | 1 – 2 working days for in stock products |
| Calibre Tooling | 1 – 2 working days for in stock products |
| Marcrist | 1 – 2 working days for in stock products |
