PEGAS 220 x 250 GH-R Gravitational Bandsaw machine.

Working movement of the arm is caused by the weight of the arm itself, speed is regulated by a hydraulic cylinder. The machine is designed for cutting of material in vertical and angle cuts, angle cuts are possible to set fluently from 0 to 60 grades to the right. Change of angle using quick clamping handle. It is suitable for piece production and small series production. Thanks to its rugged construction it enables cutting of wide range of profiles and full materials.

Manually controlled quick clamping vice, cut is regulated by a hydraulic damper and a restrictor choke valve. A course of a cut is not influenced by a human factor and it causes a higher blade life. An operator starts a machine by pressing the start button and sets a cutting speed. After finishing the cut machines stops itself automatically and an operator lifts the arm manually to the start position. Feeding of material is manual. Angle cuts are possible by arm turning.

Basic equipment of machine:

• The blade leading in guides with hard metal plates and leading bearings and along cast iron pulleys.
• There is a guide situated on the firm beam on the drive side. On the tightening side there is the guide situated on the moving beam.
• The guide beams of moving band guide is adjustable in whole working range. Manual adjustment and fixing of the guide beams.
• Guide holder moves in adjustable dovetail groove.
• The saw-band is equipped with a guard, which protects the operator from millings and cutting emulsion.
• Mechanic tightening of the blade.
• Drive of machine is solved by worm gear box with permanent oil filling. Three phase engines with double winding, two cutting speeds. Term protection of engine.
• The cooling system distributes cutting emulsion to the band guides.
• Base with a tank for chips.
• Indication of blade tightening and opening of the cover.
• Controlling 24 V.