View your shopping bag ›

My Account

  • Items. (0)
  • £0.00 (ex. VAT)

Checkout

DeWalt Cordless Brushless Nailer Twinpack Kit 18V XR in Toughsystem Box - DCK264P2

Item in stock

    MPN: n/a

    TSC: DCK264P2

£549.00 (ex. VAT)
(Delivery from )
£549.00 (ex. VAT)
Add to Basket Make an enquiry about
DeWalt
Secure Payment
  • 100% Secure
  • Item In Stock
  • Next Day Delivery

DCN692 FRAMING NAILER FEATURES:

The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.

Mechanical rather than gas operation offers consistant performance at temperature between -20 and 50 degrees celcius and minimal cleaning/service requirements.

Class leading vibration and sound figures, offer fantastic user protection.

Versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails.

Reversable belt/rafter hook povides increased portability and versatility on the job-site.

Depths can be easily adjusted using the thumb wheel depth adjuster.

Increased visibility and durability along with protection for work-surface from the non-mar contact-trip.

Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud.

Gas free operation offers a significant saving in running costs.

Tool free stall/jam clearance minimises user down time.

Cordless design so no hanging leads to deal with.

User can engage contact trip lock-off and prevent accidental dis-charge of fastener.

Dry fire lockout ensures that the tool is protected from firing without nails in the magazine.

 

DCN660 FINISHING NAILER FEATURES:

Benefit from longer runtime, quicker readiness to fire and less recoil.

Brushless motor technology offers the power to fire a 63mm nail into soft wood and 50mm nail into hard wood.

Tool free stall/jam clearance minimises user down time.

Mechanical rather than gas operation offers significant cost savings as well as consistent performance at temperatures between -20 and 50 degrees celcius and minimal cleaning /service requirements.

Protective pads to lay tool down on head.

Durable magazine accepts 32 to 63mm 16Ga nails.

Mode selector allows for bump or sequential nailing.

LED lights with error notification.

Easy tool-free clearing of jams and stall release.

Easy depth adjustment with easy to read gauge.

DCN692 FRAMING NAILER:

Nail Diameter: 2.8 - 3.3 mm

Magazine angle: 30 - 34°

Magazine loading: Rear - load

Nail Length: 50 - 90 mm

Magazine capacity: Up to 55 Nails

Firing mode: Bump & Sequential

Length: 345 mm

Width: 125 mm

Height: 338 mm

Nailer Operating Mode: Selective

Integrated Belt Hook: Yes

Jam Clearing: Yes

Impact energy: 105 J

Temperature Range: -20 to 50°C

Fault indicator: Yes

Weight: 4.1 kg

 

DCN660 FINISHING NAILER:

Nail Diameter: 1.6 (16Ga) mm

Magazine angle: 20°

Magazine loading: Rear

Nail Length: 32 - 63 mm

Magazine capacity: 110 Nails

Trigger Type: Bump & Sequential

Length: 310 mm

Width: 95 mm

Height: 305 mm

Weight: 2.7 kg

Nailer Operating Mode: Bump and Sequential

Jam Clearing: Tool free

Temperature Range: -20 to 50°C

Total Shipping Weight: 16kg

Reversible belt hook on the DCN692 

No mark tips on the DCN692 

Comes with durable Toughsystem Box

Dewalt

  • All products are covered by one year warranty (XR Lithium Ion range has three years warranty when tool is registered online)
  • Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Makita UK

  • All 18 Volt products range are covered by three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Festool

  • All products are covered by Festool's extended three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Product must have been registered online for the extended 3 year warranty (usually done by supplier)
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Trend

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Scheppach

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Mafell

Stihl

  • All Stihl petrol machinery is covered by one year warranty.
  • All Stihl petrol machinery is checked & tested at the point of purchase.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Bosch

  • All products are covered by Bosch one year warranty. Customer can register product online at Bosch to receive extended three year warranty.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

For any other warranty queries please call 0141 429 4444

DELIVERY:

We aim to deliver every parcel within 48 hours from the date of ordering. Most of the time you will receive your parcel the following day if ordered before 2:30pm but sometimes things are outwith our control (traffic, road accidents, bad weather etc.) in these circumstances we ask that you be patient with us, if your delivery is late please call us and we will investigate the situation for you. Most parcels will be delivered by Parcelforce and may require a signature upon delivery.

We deal with many stockists and sometimes we rely on their delivery times to fulfil your order, we take every care to ensure that your product is delivered within the time stated we take no responsibility for third parties and will incur no liability for any late delivery. If you have any questions or concerns regarding the delivery of an item please call us.


Mainland UK

  • Standard FREE delivery on orders over £80 + vat (excludes heavier items)
  • £7.30 + vat for orders under £80 + vat
  • Heavier goods* carriage will be added at checkout


Non Mainland UK & Northern Ireland

  • Standard delivery charged at £14.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as this depends on geological location. Competitive pricing available.


Republic of Ireland

  • Standard delivery charged at £18.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as depends on location. Competitive pricing available.


Please note:

  • For price and availability of industrial machinery call 0141 429 4444 or fill out the contact form.
  • Stihl machinery is only available for collection only.
  • Prices exclude VAT by default but you can change this by clicking on the VAT switcher at the top of the page if you want to see prices including VAT.

*Some heavier goods may still have free delivery, this will be stated at checkout.


RETURNS:

Terms and Conditions

  • In the unlikely event that an item does not meet your expectations or is faulty or damaged when you receive it, you can obtain a replacement or full refund – provided the product is returned unused in its original packaging and includes any accessories provided as well as any items provided free of charge or as part of a package deal within 14 days of your purchase. Your statutory rights are not affected. Goods must be returned at customer’s expense unless otherwise agreed with a Saw Centre employee.