View your shopping bag ›

My Account

  • Items. (0)
  • £0.00 (ex. VAT)

Checkout

Makita DTM51ZJX7 18v Multi Tool LXT Bare Unit With 23 Piece Accessory Kit

Item in stock

    MPN: n/a

    TSC: DTM51ZJX7

£129.17 (ex. VAT)
(Delivery from )
£129.17 (ex. VAT)
Add to Basket Make an enquiry about
Makita
Secure Payment
  • 100% Secure
  • Item In Stock
  • Next Day Delivery

Models makita DTM51 have been developed based on models BTM50 and equipped with the tool-less accessory change system. The latest version of the popular Makita multi-tool, the new DTM51ZJX7, features a tool-less method of installing and removing the many varieties of tools and blades used on this ambidextrous machine. Instead of using an allen key to release the tool holder, the operator simply lifts a lever immediately behind the tool operating head. This releases the lock pressure on the tool holder and the blade can be quickly changed. When the lever is pressed down and fits flush with the machine body the tool is locked into a safe operating position. This simple but very useful device makes blade changing a quicker and more precise operation. It also avoids delays whilst the allen key is retrieved either from the holder on the tool itself, from the box or bench, or from any other location.

This multi tool has an oscillation angle of 1.6° to the left and the same to the right giving a total of 3.2° and with a variable speed control dial will run between 6,000 and 20,000 oscillations per minute. This performance from a cordless machine is higher than many mains products. The Soft Start function ensures that the motor gradually increases speed even if the control is fully pressed. This prevents the substantial torque available from twisting the tool in the operator’s hand. Further safety is provided by the Anti-restart function that requires the machine to be fully switched off by the operator before it can be started again if the blade has snagged and the safety cut out has triggered. Weighing just 2.2kg, and with the ergonomically slim barrel design grip, the Makita DTM51ZJX7 is a well balanced tool which encourages accurate operation in confined spaces. This is a main attribute of a multi-tool, coupled with the many blade and tool variants available to fit the OIS tool holder system. Blades can be fitted at any of the 12 angle positions around the full 360°. This multi-tool is supplied in a MakPac case complete with saw blade and abrasive pad and papers.

 

Features and Benefits:

  • Tool-less accessory clamp. Lever style lock system allows for quick installation and replacement of accessories,.
  • Ergonomically best possible barrel grip, with a perfect circumference size and shape which fits the hand for extra comfortable handling.
  • Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been used up (Battery protector will shut off the power.)
  • Accessories can be installed at 30º increments, across 360º
  • Variable speed control dial.
  • Soft start
  • Anti-restart function.
  • High operating efficiency.
  • Accessory set included.


Technical Specification:

  • Battery Type: Lithium-ion
  • Body only machine: No battery or charger
  • Voltage: 18v
  • Shank: OIS
  • Oscillation Angle: 3.2 º
  • Oscillations per Minute: 6,000 - 20,000
  • Maximum Output: 390 w
  • Vibration K factor: 1.5 m/sec²
  • Vibration: Sanding - 3.0 m/sec²
  • Vibration: Scraping - 5.5 m/sec²
  • Vibration: Plunge Saw Blade - 7.0 m/sec²
  • Vibration: Segmental Saw Blade - 4.5 m/sec²
  • Net weight: 2.2 kg

 

Supplied With:

  • Makpac connector case (TYPE 3) with Inner tray
  • Dust extraction attachment
  • 23 Piece Accessory set

Models makita DTM51 have been developed based on models BTM50 and equipped with the tool-less accessory change system. The latest version of the popular Makita multi-tool, the new DTM51ZJX7, features a tool-less method of installing and removing the many varieties of tools and blades used on this ambidextrous machine. Instead of using an allen key to release the tool holder, the operator simply lifts a lever immediately behind the tool operating head. This releases the lock pressure on the tool holder and the blade can be quickly changed. When the lever is pressed down and fits flush with the machine body the tool is locked into a safe operating position. This simple but very useful device makes blade changing a quicker and more precise operation. It also avoids delays whilst the allen key is retrieved either from the holder on the tool itself, from the box or bench, or from any other location.

This multi tool has an oscillation angle of 1.6° to the left and the same to the right giving a total of 3.2° and with a variable speed control dial will run between 6,000 and 20,000 oscillations per minute. This performance from a cordless machine is higher than many mains products. The Soft Start function ensures that the motor gradually increases speed even if the control is fully pressed. This prevents the substantial torque available from twisting the tool in the operator’s hand. Further safety is provided by the Anti-restart function that requires the machine to be fully switched off by the operator before it can be started again if the blade has snagged and the safety cut out has triggered. Weighing just 2.2kg, and with the ergonomically slim barrel design grip, the Makita DTM51ZJX7 is a well balanced tool which encourages accurate operation in confined spaces. This is a main attribute of a multi-tool, coupled with the many blade and tool variants available to fit the OIS tool holder system. Blades can be fitted at any of the 12 angle positions around the full 360°. This multi-tool is supplied in a MakPac case complete with saw blade and abrasive pad and papers.

 

Features and Benefits:

  • Tool-less accessory clamp. Lever style lock system allows for quick installation and replacement of accessories,.
  • Ergonomically best possible barrel grip, with a perfect circumference size and shape which fits the hand for extra comfortable handling.
  • Battery capacity warning lamp Blinking red; Battery power has been nearly used up. Solid red; Battery power has been used up (Battery protector will shut off the power.)
  • Accessories can be installed at 30º increments, across 360º
  • Variable speed control dial.
  • Soft start
  • Anti-restart function.
  • High operating efficiency.
  • Accessory set included.


Technical Specification:

  • Battery Type: Lithium-ion
  • Body only machine: No battery or charger
  • Voltage: 18v
  • Shank: OIS
  • Oscillation Angle: 3.2 º
  • Oscillations per Minute: 6,000 - 20,000
  • Maximum Output: 390 w
  • Vibration K factor: 1.5 m/sec²
  • Vibration: Sanding - 3.0 m/sec²
  • Vibration: Scraping - 5.5 m/sec²
  • Vibration: Plunge Saw Blade - 7.0 m/sec²
  • Vibration: Segmental Saw Blade - 4.5 m/sec²
  • Net weight: 2.2 kg

 

Supplied With:

  • Makpac connector case (TYPE 3) with Inner tray
  • Dust extraction attachment
  • 23 Piece Accessory set

Supplied With:

  • Makpac connector case (TYPE 3) with Inner tray
  • Dust extraction attachment
  • 23 Piece Accessory set

Dewalt

  • All products are covered by one year warranty (XR Lithium Ion range has three years warranty when tool is registered online)
  • Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Makita UK

  • All 18 Volt products range are covered by three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Festool

  • All products are covered by Festool's extended three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Product must have been registered online for the extended 3 year warranty (usually done by supplier)
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Trend

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Scheppach

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Mafell

Stihl

  • All Stihl petrol machinery is covered by one year warranty.
  • All Stihl petrol machinery is checked & tested at the point of purchase.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Bosch

  • All products are covered by Bosch one year warranty. Customer can register product online at Bosch to receive extended three year warranty.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

For any other warranty queries please call 0141 429 4444

DELIVERY:

We aim to deliver every parcel within 48 hours from the date of ordering. Most of the time you will receive your parcel the following day if ordered before 2:30pm but sometimes things are outwith our control (traffic, road accidents, bad weather etc.) in these circumstances we ask that you be patient with us, if your delivery is late please call us and we will investigate the situation for you. Most parcels will be delivered by Parcelforce and may require a signature upon delivery.

We deal with many stockists and sometimes we rely on their delivery times to fulfil your order, we take every care to ensure that your product is delivered within the time stated we take no responsibility for third parties and will incur no liability for any late delivery. If you have any questions or concerns regarding the delivery of an item please call us.


Mainland UK

  • Standard FREE delivery on orders over £80 + vat (excludes heavier items)
  • £7.30 + vat for orders under £80 + vat
  • Heavier goods* carriage will be added at checkout


Non Mainland UK & Northern Ireland

  • Standard delivery charged at £14.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as this depends on geological location. Competitive pricing available.


Republic of Ireland

  • Standard delivery charged at £18.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as depends on location. Competitive pricing available.


Please note:

  • For price and availability of industrial machinery call 0141 429 4444 or fill out the contact form.
  • Stihl machinery is only available for collection only.
  • Prices exclude VAT by default but you can change this by clicking on the VAT switcher at the top of the page if you want to see prices including VAT.

*Some heavier goods may still have free delivery, this will be stated at checkout.


RETURNS:

Terms and Conditions

  • In the unlikely event that an item does not meet your expectations or is faulty or damaged when you receive it, you can obtain a replacement or full refund – provided the product is returned unused in its original packaging and includes any accessories provided as well as any items provided free of charge or as part of a package deal within 14 days of your purchase. Your statutory rights are not affected. Goods must be returned at customer’s expense unless otherwise agreed with a Saw Centre employee.