View your shopping bag ›

My Account

  • Items. (0)
  • £0.00 (ex. VAT)

Checkout

DeWalt DCN692N 18V Brushless XR Gas Free Nailer 90mm Bare Unit

Item in stock

    MPN: n/a

    TSC: DCN692N

£215.00 (ex. VAT)
(Delivery from )
£215.00 (ex. VAT)
Add to Basket Make an enquiry about
DeWalt
Secure Payment
  • 100% Secure
  • Item In Stock
  • Next Day Delivery

Tough, productive and easy to use - with the power to drive a 90mm ring shank nail temperatures as low as -15°. This nail gun is able to fire a 90mm ring shank nail into soft wood and 63mm into hard woods.

A combination of intelligent electronics & the DEWALT BRUSHLESS motor mean that even the heaviest user should complete a full days work with a single battery change. Unique Bump Mode function of the DEWALT nail gun allows the user to fire 2 nails per second. Battery pack below the handle creates a well balanced unit that fits easily between 400mm centre studs.

Features and Benefits:

  • Two speeds
  • Longer run time
  • Quicker readiness to fire
  • Less recoil
  • Able to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods
  • Sequential operating mode allows for precision placement
  • Bump operating mode provides the user with production speed
  • Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees
  • Will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
  • Reversible belt/rafter hook provides increased portability
  • Depths can be easily adjusted using the thumb wheel depth adjuster
  • Ergonomic tool design
  • Tool free stall/jam clearance minimises user down time
  • Cordless
  • User can engage contact trip lock-off and prevent accidental dis-charge of fastener
  • Dry fire lockout ensures that the tool is protected from firing without nails in the magazine

Technical Specifications:

  • Battery chemistry: XR Li-Ion
  • Voltage: 18v
  • Nail Diameter: 2.8 - 3.3 mm
  • Magazine angle: 30 - 34°
  • Magazine loading: Rear load
  • Nail Length: 50 - 90 mm
  • Magazine capacity: Up to 55 Nails
  • Firing mode: Bump & Sequential
  • Length: 345mm
  • Width: 125mm
  • Height: 338mm
  • Weight: 4.1kg
  • Nailer Operating Mode: Selective
  • Integrated Belt Hook: Yes
  • Jam Clearing: Yes
  • Impact energy: 105J
  • Temperature Range: -20 to 50°C
  • Fault indicator: Yes

Dewalt

  • All products are covered by one year warranty (XR Lithium Ion range has three years warranty when tool is registered online)
  • Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Makita UK

  • All 18 Volt products range are covered by three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Festool

  • All products are covered by Festool's extended three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Product must have been registered online for the extended 3 year warranty (usually done by supplier)
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Trend

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Scheppach

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Mafell

Stihl

  • All Stihl petrol machinery is covered by one year warranty.
  • All Stihl petrol machinery is checked & tested at the point of purchase.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Bosch

  • All products are covered by Bosch one year warranty. Customer can register product online at Bosch to receive extended three year warranty.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

For any other warranty queries please call 0141 429 4444

DELIVERY:

We aim to deliver every parcel within 48 hours from the date of ordering. Most of the time you will receive your parcel the following day if ordered before 2:30pm but sometimes things are outwith our control (traffic, road accidents, bad weather etc.) in these circumstances we ask that you be patient with us, if your delivery is late please call us and we will investigate the situation for you. Most parcels will be delivered by Parcelforce and may require a signature upon delivery.

We deal with many stockists and sometimes we rely on their delivery times to fulfil your order, we take every care to ensure that your product is delivered within the time stated we take no responsibility for third parties and will incur no liability for any late delivery. If you have any questions or concerns regarding the delivery of an item please call us.


Mainland UK

  • Standard FREE delivery on orders over £80 + vat (excludes heavier items)
  • £7.30 + vat for orders under £80 + vat
  • Heavier goods* carriage will be added at checkout


Non Mainland UK & Northern Ireland

  • Standard delivery charged at £14.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as this depends on geological location. Competitive pricing available.


Republic of Ireland

  • Standard delivery charged at £18.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as depends on location. Competitive pricing available.


Please note:

  • For price and availability of industrial machinery call 0141 429 4444 or fill out the contact form.
  • Stihl machinery is only available for collection only.
  • Prices exclude VAT by default but you can change this by clicking on the VAT switcher at the top of the page if you want to see prices including VAT.

*Some heavier goods may still have free delivery, this will be stated at checkout.


RETURNS:

Terms and Conditions

  • In the unlikely event that an item does not meet your expectations or is faulty or damaged when you receive it, you can obtain a replacement or full refund – provided the product is returned unused in its original packaging and includes any accessories provided as well as any items provided free of charge or as part of a package deal within 14 days of your purchase. Your statutory rights are not affected. Goods must be returned at customer’s expense unless otherwise agreed with a Saw Centre employee.