Guaranteed quality at your finger tips. Easy and precise, practical design, a wider range of applications.

Discover the "Xylent" cutterhead, available for this machine.

Advantages

One machine for every requirement with the interchangeable rollers.
Quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as minimum removal of fine wood and/or batches where multiple pieces of different thicknesses are processed.

Perfect finish with the feeding rollers on connecting roads.
The stopping of the work piece and the presence of notches on its surface are eliminated due to the movement system on all three rollers that allows their vertical displacement by rotation and the best linear feeding.

Sturdy structure with precision when moving the work table
The 4 screws with a large diameter combined with the 2 side linear guides ensure worktable stability eliminating the necessity of  locking in position. The integrated protections guarantee high precision and reliability over time.

Exceptional finish with the “Xylent” spiral knife
Reduced noise during machining provides a more comfortable working environment. It also improves the dust extraction due to the production of very small chips. Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.

Standard Equipment

• Powered lifting of thicknessing table, 2 speeds with micrometric adjustment
• Electronic digital readout of working height with decimal control
• Variable feed speeds of workpiece, electronically controlled by means of inverter from 4 to 20 m/min
• Thicknessing table with vertical moving by means of 4 steel screws
• 1st front roller in helicoidal steel
• 2 outfeed top feed rollers with rubber coating
• Interchangeable feed rollers
• 3 phase 7kW (9.5hp) 50Hz motor with manual star-delta start (CE versions)
  
  • N.B.: The machine has to be electrically connected to the neutral power

Safety Equipment

• Soundproof infeed and outfeed barrier
• Emergency pushbutton on rear machine side
• Safety microswitch on protection hood (CE version)
• Padlockable main switch
• Overload switch protection
• Auxiliary low voltage circuit (110 volt) 
• Automatic brake on motor (CE version)
• Certificate of conformity "C.E. standards" (CE version)

Technical Specification

• Cutterhead working width: 520 mm / 20 inches
• Cutterblock diameter: 120 mm
• Number of standard Tersa knives: 4
• Standard Knives dimensions: 520 x 35 x 3 mm
• Max. stock removal: 8 mm
• Worktable dimensinos: 530 x 900 mm
  
• Adjustable feed speed: 4 to 20 m/min
• Min. / max. thicknesser working height: 3.5 - 300 mm / 0.14 - 12 inches
• Min. thicknesser working length: 220 mm
• Min. thicknesser working width: 10 mm
• Three-phase motor: 7 kW (9.5 hp) 50 Hz
• Exhaust hood diameter: 150 mm

Optional Extras

• 53.03.07: Pneumatic pressure adjustment on top feed rollers
• 32.03.07: Thicknessing table with 2 idle rollers
  
  • N.B. It is advisable for heavy duty woodworking operations when moist or resinous wood is processed.
• 57.00.04: First top feed roller with rubber coating alternative to the toothed steel roller
• 32.01.50: 1st sectional feed roller in steel alternative to the std toothed roller
• 57.02.41: Steel outfeed rollers instead of the rubber-coated steel rollers
  
  • N.B.: The option is exclusively suggested for machining not requiring particular finishing accuracy
    (i.e. heavy carpentry, packings, sofas frames).
  • Together with this option it is advisable to foresee the thicknessing table with two idle rollers.
• 34.02.12: "TERSA" type cutter block with throwaway knives
  complete with one set of knives
  
  • N.B.: Increased power is recommended on main motor for heavy removal
• 57.03.23: "Xylent" spiralknife cutterblock with 84 knives (15 x 15 x 2.5mm)
• 57.03.27: Xylent maintenance kit
• 57.03.28: 10 spare inserts kit (15 x 15 x 2.5mm) for Xylent spindle
• 57.02.50: Worktable extension in outfeed (630 x 1200mm dimensions) complete with automatic pneumatic locking
• 97.04.68: 3 phase motor 9kW (12hp) 50Hz complete with automatic star-delta start