The SCM Class TF 130 Fixed Spindle Moulder is the essential and professional solution for every application. Technological devices in the electronic version that guarantee reduced machine set up times, greater safety and ease-of-use.

Advantages

Set up precision and reliability
The operator easily adjusts every movement thanks to the handwheel with mechanical readout positioned on the machine front.

Very reduced machine set up time
With the version with powered lifting of the spindle with controls and position digital readout positioned on the machine front.

Spindle moulder fence with mechanical programming
Maximum set up speed and ease-of-use. No more test runs due to digital readouts that ensure accuracy to a tenth of a millimetre in positioning the two worktables.

Standard Equipment

• Manual tool-holder shaft lifting, complete with mechanical readout of working height
• Electric speed display dial (CE versions)
• Reverse spindle rotation with electrical interlocking for reverse operation
• Adjustable fence with wooden tables complete with exhaust hood and connecting wooden table (max. tool diameter 250 mm)
• Electrical presetting for feeder (CE version)
• Automatic star-delta start (CE version machines)
• 7kW (9.5hp) 50Hz motor with automatic star-delta start (CE version machines)

Safety Equipment

• Spindle protection for shaping operations (160 mm max. tool diameter) (CE version)
• Emergency pushbutton 
• Safety microswitches on spindle locking (CE version) 
• Safety microswitch on motor access door 
• Padlockable main switch
• Overload switch protection
• Auxiliary low voltage circuit (110 volt)
• Automatic brake on main motor (CE version) 
• Certificate of conformity "C.E. standards" (CE version) 

Technical Specification

• Max. useful spindle length: 180 mm / 7 inches
• Max. useful spindle length: 180 mm / 7 inches
• Spindle speed: 3000 / 4500 / 6000 / 7000 / 10000 rpm
• Max. diameter of the profiling tool:  250 mm / 9.8 inches
• Max. tool diameter retractable under the table at 90°: 300 mm / 11.8 inches
• Max. diameter of the tenoning tool: 300 mm / 11.8 inches
• Worktable dimensions: 1200 x 730 mm Working length of spindle diameter 30-35 (40-50): 140 mm (180 mm)
• Spindle base projection from table: 52 mm
• Spindle base projection from table with interchangeable spindle: 92 mm
• Spindle rotating speed: 3000 / 4500 / 6000 / 7000 / 10000 rpm
• Max tool diameter retractable under worktable with rings (with “Fast” section table): 320 x 85 mm
• Spindle fence stroke with mechanical programming (positioning with respect to the spindle axis): 125 mm (from -125 to +125 with spindle MK5)
• Motor power: 7kW (9.5hp) 50Hz
• External diameter of exhaust outlet on spindle moulder hood: 120
• External diameter of exhaust outlet on base: 120 mm
• Air flow speed of exhaust hood: 20 m/s
• Exhaust system air consumption: 1700 m3/h

Optional Extras

• 57.02.21: * Spindle moulder fence with mechanical adjustment. Spindle moulder fence with continuous linear adjustment by handwheels accessible from the front of the machine:
• adjustment of entire fence in respect of tool diam.
• adjustment of entry fence for thick removal
• mechanical readout for the adjustment
• wooden tables and connecting plate
• 250 mm max. tool diameter
• 29.13.21: "FAST" section table replacing the table rings
  to optimize the working support under the cutting tool, with manual external adjustment
• 57.02.60: * Upper mobile control panel can be easily reached by the operator
• 57.02.12: "Flex" spindle moulder fence with mechanical adjustment. Spindle moulder fence with adjustment by handwheels accessible from the front of the machine
• adjustment of entire fence in respect of tool diam.
• adjustment of entry fence for thick removal
• mechanical readout for the adjustment
• wooden tables and connecting table
• "Flex" system to facilitate the exclusion of the fence from worktable
• 250mm max. tool diameter
• 24.01.54: * Aluminium fence instead of wooden fence with connecting bars between the two tables
• 26.01.08: MK5 interchangeable spindle. The MK5 interchangeable spindle includes the presetting for the “T-SET” rapid tool locking.
• N.B.: The MK5 interchangeable spindle allows to purchase the “T-SET” device as accessory to retrofit the machine.
• 13.02.09: Spare spindle (for MK5 interchangeable spindle)
• 57.02.10: MK5 right tool taper, complete with ring and collet complete with ER 32 type clamp, 1/2” diameter
• 57.02.11: MK5 left tool taper, complete with ring and collet complete with ER 32 type clamp, 1/2” diameter
• 57.02.92: "T-SET" rapid tool locking. A simple compressed air gun allows the tools locking and unlocking
  • “T-SET” is compatible with only one tool diameter. In case you select additional spare spindles for MK interchangeable spindle with different diameter with respect to the diameter selected during machine composition, it is necessary to order a number of “T-SET” system equal to the different diameters of the selected spindles
• N.B.: The option is only available together with the MK5 interchangeable spindle
• 57.01.41: "LL" version with 2 cast-iron profiling extensions complete with:
• extensions of worktable on left and right hand side for a total worktable length of 2500 mm
• extractable front extension
• emergency pushbutton
• 11.02.05: Carriage on fixed table for small tenoning operations complete with + / - 60° swivelling fence with stops, telescopic extension and eccentric clamp. 250 mm max. tool diameter, with standard profiling fence.
• 57.00.00: "TL" version for tenoning-profiling (C.E.) with manual feed tenoning carriage
• eccentric clamp
• telescopic tilting fence with 4 reference stops for workpiece length programming
• 1 anti-splinter device on fence with reference stop
• 1 infeed table extension complete with adjustable front support bar for large workpieces
• tenoning hood with exhaust hood:
  • with rapid tool change, max tool diameter 300 mm
  • with spindle from 30 to 35 mm, max tool diameter 300 mm
  • with spindle from 40 to 50 mm, max. tool diameter 350mm
• emergency pushbutton,
• operator arm protection,
• microswitches for control and limit of 3000 / 4500 rpm during tenoning operations.
• N.B.: available only together with spindle moulder fence with mechanical adjustment or as alternative the "Flex" spindle moulder fence. 7 kW minimum main motor power is compulsory
• 57.01.05: PRO-10 "TL" version for tenoning-profiling with manual feed tenoning carriage with sliding on THK guides through recirculating ball bearing pads. It can be easily excluded from work table
• +45°/-45° tiltable telescopic fence with reference to the feed direction
• telescopic tilting fence with 4 reference stops for programming of workpiece length
• worktable with side extensions (2500 mm total length), complete with adjustable front support bar for large workpieces
• eccentric clamp
• no. 1 anti-splinter device on fence with reference stop,
• tenoning hood with exhaust hood:
  • with rapid tool change, max tool diameter 300 mm,
  • with 30-35 mm spindle, max. tool diameter 300 mm
  • with 40-45 mm spindle, max. tool diameter 350 mm
• emergency pushbutton
• operator arm protection
• microswitches for control and limit of 3000/4500 rpm during tenoning operations (only for CE configuration).
• N.B.: available only together with spindle moulder fence with mechanical adjustment or as alternative the "Flex" spindle moulder fence
• 57.00.64: 9kW (12hp) 50Hz Motor with automatic star-delta start

Advanced Material Processing

• 53.03.20: Machine configuration for the machining of advanced materials. This configuration makes the machine suitable also for the machining of cork, stiff rubber or plastic and plastic-coated plywood. Metals and cement-wood base composite are excluded.
  
  • N.B.: For material which are not included in the list
    Due to the high variety of the extra-wood market, prior to engaging in the offer of a technical solution it is compulsory to send to SCM some material samples to carry out a proper check