The SCM Class TI 120 Tilting Spindle Moulder is the essential and professional solution for every application. Technological devices in the electronic version that guarantee reduced machine set up times, greater safety and ease-of-use.

Advantages

Set up precision and reliability
The operator easily adjusts every movement thanks to the handwheel with mechanical readout positioned on the machine front.

Very reduced machine set up time
With the version with powered lifting of the spindle with controls and position digital readout positioned on the machine front.

Spindle moulder fence with mechanical programming
Maximum set up speed and ease-of-use. No more test runs due to digital readouts that ensure accuracy to a tenth of a millimetre in positioning the two worktables.

Standard Equipment

• Manual tool-holder shaft lifting, complete with mechanical readout of working height
• Manual tool-holder shaft tilting, complete with mechanical readout of working height
• Electric speed display dial (CE versions)
• Reverse spindle rotation with electrical interlocking for reverse operation
• Adjustable fence with wooden tables complete with exhaust hood and connecting wooden table (max. tool diameter 250 mm)
• Electrical presetting for feeder (CE version)
• Direct motor start (CE version machines)
• 5kW 50Hz motor 

Safety Equipment

• Spindle protection for shaping operations (160 mm max. tool diameter) (CE version)
• Emergency pushbutton 
• Safety microswitches on spindle locking (CE version) 
• Safety microswitch on motor access door 
• Padlockable main switch
• Overload switch protection
• Auxiliary low voltage circuit (110 volt)
• Automatic brake on main motor (CE version) 
• Certificate of conformity "C.E. standards" (CE version) 

Technical Specification

• Worktable dimensions: 1200 x 810 mm 
• Spindle tilting: +45° to -45°
• Working length of spindle diameter 30-35 (40-50): 140 (180) 
• Spindle base projection from table: 25 mm
• Spindle base projection from table with interchangeable spindle: 53 mm
• Spindle rotating speed: 3000 / 4500 / 6000 / 7000 / 10000 rpm
• Max tool diameter retractable under worktable with rings: 320 x 60 mm 
• Spindle fence stroke with mechanical programming (positioning with respect to the spindle axis): 125 mm (from -90 to +125 mm) 
• Motor power: 5kW 50Hz
• External diameter of exhaust outlet on spindle moulder hood: 120 mm 
• External diameter of exhaust outlet on base: 2 x 80 mm 
• Air flow speed of exhaust hood: 20 
• Exhaust system air consumption: 1550 m³/h

Optional Extras

• 29.13.21: * "FAST" section table replacing the table rings
  to optimize the working support under the cutting tool, with manual external adjustment
• 24.01.54: * Aluminium fence instead of wooden fence with connecting bars between the two tables
• 57.01.06: Spindle speeds 1300 / 3000 / 4500 / 6000 / 9000 rpm
• 26.01.13: MK4 interchangeable spindle
• 13.02.10: Spare spindle (for MK4 interchangeable spindle)
• 57.02.90: MK4 right tool taper, complete with ring and collet complete with ER 32 type clamp, 1/2” diameter
• 57.02.91: MK4 left tool taper, complete with ring and collet complete with ER 32 type clamp, 1/2” diameter
• 57.01.41: "LL" version with 2 cast-iron profiling extensions complete with:
• extensions of worktable on left and right hand side for a total worktable length of 2500 mm
• extractable front extension
• emergency pushbutton
• 11.02.05: Carriage on fixed table for small tenoning operations complete with + / - 60° swivelling fence with stops, telescopic extension and eccentric clamp. 250 mm max. tool diameter, with standard profiling fence.
• 57.00.00: "TL" version for tenoning-profiling (C.E.) with manual feed tenoning carriage
• eccentric clamp
• telescopic tilting fence with 4 reference stops for workpiece length programming
• 1 anti-splinter device on fence with reference stop
• 1 infeed table extension complete with adjustable front support bar for large workpieces
• tenoning hood with exhaust hood:
  • with rapid tool change, max tool diameter 300 mm
  • with spindle from 30 to 35 mm, max tool diameter 300 mm
  • with spindle from 40 to 50 mm, max. tool diameter 350mm
• emergency pushbutton,
• operator arm protection,
• microswitches for control and limit of 3000 / 4500 rpm during tenoning operations.
• N.B.: available only together with spindle moulder fence with mechanical adjustment or as alternative the "Flex" spindle moulder fence. 7 kW minimum main motor power is compulsory
• 57.02.51: 7kW 9.5hp 50Hz motor power with automatic star-delta start
• 57.02.52: 9kW 12hp 50Hz (11kW 15hp 60HZ) motor power
  with automatic star-delta start

Note: Options marked with * are not available for preconfigured machines