Sales and Service: 0141 429 4444
Follow Us
My Cart ( )
Toggle Nav

SCM Minimax SI X Sliding Table Saw with Tilting Blade

SKU: SIX
Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

Sliding carriage circular saw with ±46° double tilting saw blade. It allows simultaneous use of a 400mm saw blade and 160mm scoring blade both for 90° cutting and ±46° tilted cutting, guaranteeing the maximum cutting height on veneered panels and solid wood. 

Sliding carriage circular saw with ±46° double tilting saw blade. It allows simultaneous use of a 400mm saw blade and 160mm scoring blade both for 90° cutting and ±46° tilted cutting, guaranteeing the maximum cutting height on veneered panels and solid wood. 

Finally available at everybody’s reach. With powered and programmed sawblade movement available as standard.

Advantages

Maximum Tilt
Circular saw with ±46° double tilting; now at everybody's reach.

New saw unit with a stiff cast-iron structure
Can accommodate a blade of 400 mm diameter with scoring blade mounted. It ensures a perfect and easy cutting of veneer panels and thick solid wood material with very high thickness both at 90° and tilted cuts at ±46°. The saw blade uses 100% of the motor power, thanks to the scoring blade with an independent motor as standard.

Unrivalled cutting finishing
Optimal support also to larger pieces, with the new sliding table 360 mm wide. Exceptional precision and smoothness: to secure the guides it is not used glue, since the thickness could affect sliding. They are secured with a procedure of aluminum riveting.

Automatic positioning of the parallel fence
From “Ready” control (3 axes). Programmed or manual fence movement with a hold-down drive for the maximum versatility. In addition the Ready 3 UP version has the control on the mobile control panel.

Standard Equipment

  • Cast iron saw unit, wiith lifting system by means of cylindrical bars and tilting on high rigidity sliding side trunnions, complete with scoring unit with independent motor and external setting up
  • Anodized aluminium alloy carriage (dimensions 360 x 2600 mm) sliding on hardened steel guides, which are fixed on the carriage by means of mechanical bending system
  • Squaring frame (dimensions 1200 x 650 mm) complete with:
    • telescopic fence with 2 flip-over stops and metric rule tilted towards the operator
    • eccentric clamp
    • swinging arm support
    • idle roller to facilitate the panel loading/unloading
  • Dedicated saw parallel fence complete with:
    • - "high rigidity" cast iron fence support
    • - micrometric adjustment and cam-locking system
    • - rectified steel round sliding bar, 45 mm diameter
  • "READY" electronic control with 2 standard axes (3rd axis available as option):
    • powered control of blades unit lifting/tilting
    • tools data setting with automatic height adjustment with respect to the tilting.
    • mode: manual, semiautomatic and automatic with memory capacity up to 99 programs.
    • additional functions: calculator and hour counter.

Technical Specification

  • Cast iron worktable dimensions: 1000 x 685 mm
  • Max. sawblade diameter with scoring blade: 400 mm / 16 inches
  • Sawblade tilting: from -46° to +45°
  • Max. sawblade projection from table at -46°: 136 mm
  • Max. sawblade projection from table at 90°: 97 mm
  • Max. sawblade projection from table at +45°: 60 mm
  • Cutting width on parallel fence (Rip capacity): 1270 mm / 50 inches
  • Max. squaring stroke of sliding table saw: 2600 / 3200
  • 3 phase motor: 7 kW (9.4 hp) 50 Hz
  • Scorer motor: 0.9 kW (1.2 hp) 50Hz
  • Exhaust diameter: 120 - 80 mm

Optional Extras

  • 58.04.90: Version with maximum squaring stroke 3200mm
  • 58.04.80: Start/stop pushbuttons for the main blade and scoring blade integrated in the sliding carriage. Very useful when machining very large dimensioned work pieces that prevent an easy and safe access to the main machine control panel
  • 58.02.13: Angular cutting device with flip-over stops equipped with:
    • telescopic fence with two flip-over stops
    • pre-set for angle rapid selection
  • 58.02.15: Pre-set angular cutting device directly positioned on squaring frame
  • 58.05.03: Squaring frame with CompeX device for angular cutting with automatic self-adjustment of the stops position.
  • 58.05.04: Squaring fence with no. 2 LCD readouts for stops position
    • Each stop with micrometric adjustment is equipped with electronic digital readout with detecting
      system on magnetic band and readout on LCD display.
      • N.B. The minimum height to position the stop near the blade is 420 mm (450 mm for circular saw with +/-46° double tilting ). It is possible to fill up this limit purchasing a "third squaring stop with LCD display for the position readout".
  • 58.05.05: Third squaring stop with LCD display for the position readout
    • With micrometric adjustment is equipped with electronic digital readout with detecting system on magnetic band and readout on LCD display.
    • N.B. Only for squaring fence with no. 2 LCD readouts for stops position
  • 58.05.44: "READY 3" version. In addition to the standard function the Ready control foresees:
    • Powered parallel fence with electronic programmer
    • position readout on encoder
    • adjustment by means fo recirculating ball screws
    • continuously adjustments by means of pushbuttons or automatic positionings
    • possibility of incremental positionings
    • possibility of fence exclusion
    • 270mm cutting width
  • 58.05.46: "READY 3 UP" version. In addition to the standard function the Ready control foresees:
    • – powered parallel fence with electronic programmer
    • – position readout on encoder
    • – adjustment by means fo recirculating ball screws
    • – continuously adjustments by means of pushbuttons or automatic positionings
    • – possibility of incremental positionings
    • – possibility of fence exclusion
    • – 1270mm cutting width
    • * mobile control panel
  • 58.03.45: Additional table on the sliding table
    for the support of panels with large dimensions
  • 58.02.05: Digital readout for parallel fence positions
    complete with digital display and magnetic band
    • N.B. It is already included with "READY 3", "READY 3 UP" and in the option "Powered parallel fence with
      electronic programmer (1 axis)”
  • 58.05.47: 2 saw blade rotating speed (3500/5000 rpm)
    • N.B. - It is available only with “READY 3 UP” optional device
  • 58.05.69: "DADO SET" capability
    Mechanical presetting to use a tool (not included) in place of the main blade.
    • 200 mm/ 8” maximum diameter
    • 19 mm/ 3/4” maximum thickness
More Information
MPN R0.00.00
Country of Manufacture Italy
Manufacturer SCM Minimax
Write Your Own Review
You're reviewing:SCM Minimax SI X Sliding Table Saw with Tilting Blade

UK Mainland Delivery

We try our best to dispatch all stock orders same day on a on a next day service. Dispatch times may vary depending on your geographical location and items ordered.

For full terms and conditions please visit our Delivery & Returns page.


Standard* delivery via courier is free for orders over £50 ex vat and under 30kg in weight.

Orders under £50 ex vat and 30kg in weight are subject to a standard* £5.83 ex vat handling and packaging fee.

Stock orders received before 12pm Monday to Friday will be processed and dispatched the same working day. Orders received after 12pm Monday to Friday will be processed and dispatched the next working day (excludes weekends). Standard delivery via courier is free for orders over £50 ex vat and under 30kg in weight. Orders under £50 ex vat and 30kg in weight are subject to a standard £5.83 ex vat handling and packaging fee. Orders over 30kg will be subject to courier or volumetric surcharges.

Orders sent direct from our suppliers are dispatched in accordance to supplier delivery terms.

Laguna: 2 - 3 days, delivery to UK mainland only. A Laguna rep will contact you by phone to arrange delivery that suits you.
Holzmann, Scheppach, Zipper and SIP: 2 - 3 days, delivery to UK mainland only, for Highlands and Islands a delivery surcharge may be applicable, call us on 0141 429 4444 to enquire before you order.

Upsell Products

SCM Nova SI 300S Sliding Table Saw with Tilting Blade

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Nova SI 400 Sliding Table Saw with Tilting Blade

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Class SI 350 Sliding Table Saw with Blade Tilting

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Class PX 350i Automatic Sliding Table Saw with Mobile Tilting Blade

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM L'invincibile SI 3 Sliding Table Saw with Tilting Blade

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.
SIP 01446 12" Cast Iron Table Saw
45%

Sedgwick TA315 Tilt Arbor Saw Bench 315mm Single Phase

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

Sedgwick TA450 450mm Tilt Arbor Sawbench

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Minimax SC 3C Sliding Table Saw

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.