SCM Nova SI 300S Sliding Table Saw with Tilting Blade
The SCM Nova SI 300S Sliding Table Saw guarantees quality at your fingertips. Essential configuration with complete equipment to carry out professional machining.
The SCM Nova SI 300S Sliding Table Saw guarantees quality at your fingertips. Essential configuration with complete equipment to carry out professional machining.
Advantages
Saw unit: a perfect cut.
Maximum torsional rigidity and the total absence of vibration through the closed loop structure of the saw unit which ensures perfect alignment of the blades during tilted and difficult cuts.
Sliding carriage: smooth sliding and a solid work surface.
The wide section of the carriage, with closed reticular geometry provides extreme rigidity and minimum deflection. A smooth operating motion is guaranteed over time by the system of sliding bearings running on hardened steel
Manual movements: always user friendly and precise.
Ease of use in every day operation due to the dedicated gear box, fully protected from dust (SCM patented solution), that provides a smooth and direct transmission. Every minimum handwheel movement corresponds to a precise blade adjustment.
Manual adjustment of the scoring unit: simple and effective.
Vertical and horizontal adjustments are carried out by user-friendly mechanical levers that operate directly making precise and smooth movements. The useful mechanical stops allows immediately finding of the set position. The positioning of the controls allows their use without moving from the front of the machine.
Preconfigured Versions
- 55.50.65: "CUT 140" version 400 mm maximum blade diameter for 140mm cutting height with 90° blade complete with:
- overhead blade protection
- motor power kW 7 HP 9,5 Hz 50
- 3700 rpm main blade speed
Standard Equipment
- 10 years guarantee for the carriage sliding system
- Anodized aluminium alloy carriage sliding on hardened steel guides, which are fixed on the carriage by means of mechanical
bending system - Sliding carriage length 1600mm
- Lifting and tilting of saw unit by means of handwheels on the machine front side and mechanical readout of saw unit tilt
- Compact base and short carriage
- Squaring frame for the fast fence positioning of angular cuttings
- 2 reversible stops on the squaring fence
- Outfeed table extensions
- Dedicated saw parallel fencecomplete with:
- "high rigidity" cast iron fence support
- micrometric adjustment and cam-locking system
- rectified steel round sliding bar, 45 mm diameter
- Ripping capacity on parallel fence 1000 mm
- Direct start main motor with pushbuttons
- Independent powered scoring unit with external setting up and stops for a quick re-positioning of the blade
Safety Equipment
- Emergency pushbuttons located on parallel fence side (CE version)
- Overload protection
- Blade protection on riving knife (versions with electrical protections) with exhaust outlet 60mm.
- Blade protection on riving knife (CE version)
with exhaust outlet 60mm - Automatic brake on main sawblade (CE version)
- Padlockable main switch
- Auxiliary low voltage circuit (110 voltage)
- Certificate of conformity with "C.E. Standards" (CE version)
Technical Specification
- Max cutting height at 90°: 100 mm
- Max cutting height at 45°: 70 mm
- Blade tilt: 45°
- Blades lifting and tilt: manual
- Main blade rotating speed: 4000 rpm
- Scoring unit rotating speed: 8500 rpm
- Saw unit motor power: 5 kW (7 HP) 50 Hz
- Scoring unit motor power: 1.3 kW (1.7 hp) 50 Hz
- Squaring capacity: 1600 x 2600 mm
- Cutting width on parallel fence: 1000 mm
- Exhaust outlet diameter:
- at the base: 120 mm
- on overhead protection: 80 mm
- on riving knife: 60 mm
Optional Extras
- 57.01.24: Overhead saw guard with incorporated dust extraction 80 mm outlet diameter.
- 57.01.22: Angular cutting device with flip-over stops equipped with:
- telescopic fence with two flip-over stops
- pre-set for angle rapid selection
- 57.01.23: Device for angular cutting with self-adjustment of the stop position in respect of the blade, irrespective of the angles used, complete with aluminium fence with stop
- 57.01.62: Device for parallel cutting for rapid fixing on the carriage, complete with millimetric rule
- 57.03.43: Digital readout for parallel fence positions complete with digital display and magnetic band
- 57.02.61: Ripping capacity on parallel fence 1270 mm
- 57.01.26: Ripping capacity on parallel fence 1500 mm
- 53.03.40: Expandable scoring blade
- Min. / max. thickness: 2.8 / 3.6 mm
- Blade diameter: 120 mm
- Bore diameter: 20 mm
- Number of teeth: Z 24
- 57.03.36: "DADO" machining. Mechanical presetting to use a tool (not included) in place of the main blade.
- – 203mm/8” max. diameter
- – 30mm internal diameter
- – 20mm maximum thickness
- – 40mm max working depth
N.B.: For NOVA SI 300S in CE version it is compulsory to
select the option“overhead sawblades protection”.
- 57.01.07: Eccentric clamp
- 57.01.28: 7kW (9.5hp) 50Hz
N.B.: Not available for preconfigured options
Advanced Material Processing
- 53.03.30: Machine configuration for the machining of advanced materials. This configuration makes the machine suitable also for the machining of cork, stiff rubber or plastic and plastic-coated plywood. Metals and cement-wood base composite are excluded.
- 53.03.16: Device for the blade micro-lubrication to machine plastic materials and light alloys of aluminium and brass with quantity adjusting system of the sprayed liquid lubrication
N.B.: The device is compulsory for the machining of light alloys of aluminum and brass, particularly useful with certain plastic materials
MPN | R1.09.35 |
---|---|
Country of Manufacture | Italy |
Manufacturer | SCM Nova |
UK Mainland Delivery
We try our best to dispatch all stock orders same day on a on a next day service. Dispatch times may vary depending on your geographical location and items ordered.
For full terms and conditions please visit our Delivery & Returns page.
Standard* delivery via courier is free for orders over £50 ex vat and under 30kg in weight.
Orders under £50 ex vat and 30kg in weight are subject to a standard* £5.83 ex vat handling and packaging fee.
Stock orders received before 12pm Monday to Friday will be processed and dispatched the same working day. Orders received after 12pm Monday to Friday will be processed and dispatched the next working day (excludes weekends). Standard delivery via courier is free for orders over £50 ex vat and under 30kg in weight. Orders under £50 ex vat and 30kg in weight are subject to a standard £5.83 ex vat handling and packaging fee. Orders over 30kg will be subject to courier or volumetric surcharges.
Orders sent direct from our suppliers are dispatched in accordance to supplier delivery terms.
Laguna: 2 - 3 days, delivery to UK mainland only. A Laguna rep will contact you by phone to arrange delivery that suits you.
Holzmann, Scheppach, Zipper and SIP: 2 - 3 days, delivery to UK mainland only, for Highlands and Islands a delivery surcharge may be applicable, call us on 0141 429 4444 to enquire before you order.