SCM Profiset 60 Automatic Planer and Throughfeed Moulder is a 6-spindle automatic planer and throughfeed moulder with 40 mm profiling capacity by means of vertical spindles.

Features the “EASY PLUS” electronic control with 7" colour display, 16:9 for a simple and intuitive management of all machine functions. Powerful, efficient and linear feeding is ensured by the gearbox feed drive system and the cardan joints combined with the pneumatic pressure on the feed rollers. The reference engraver placed on the infeiron planer spindle acts as a straightening system.

Advantages

Ergonomics and safety
The operator easily manages every working operation due to all controls at your fingertips. The manual pump for the worktable lubrication positioned in the working area facilitates its use, assuring always the best smooth movement of the work piece.

The optimum feeding
More productivity and improved finishing. Gears box drive and cardan joints. Pneumatic working pressure on the feed rollers. Inverter for the stepless speed adjustment from 5 to 25 m/min.

EASY PLUS
The operating advantage for easy assistance. Maximum reliability due to the function pushbuttons and easy-to-use with the electronic control of up to 5 axes with the 7” LCD display, 16:9 format. Integrated and fast control of all dedicated functions. These features translate into immediate improvements in productivity and guarantees the capability of the full potential of the machine.

“T-SET” rapid tool locking device
Maximum degree of safety without any efforts. It ensures the locking/unlocking of tools simply through a gun with compressed air.

Features

Machine base
Thick steel machine base with strongly ribbed structure and tubular supporting base.

Worktables
Tubular steel infeed table with vertical adjustment by means of parallelogram system. The cast iron worktables have a low friction co-efficient and are extremely hardwearing. They are equipped with removable inserts in front of the vertical spindles.

Fences
Widthwise adjustable infeed right fence by means of parallelogram system and it is complete with a pre-straightening system through the reference engraver placed on planer spindle (tool is not included).
Right fences with easily adjustable sectors for a correct positioning according to the used tools.

Spindles
100 mm diameter cast iron spindle cylinder with a couple of 85mm diameter radial bearings. Centre-to-centre distance between bearings: 215mm to ensure the maximum stiffness and precision.

Feed system
The beam which supports the feed system is made of a tubular ribbed structure and it is provided with manual vertical movement or automatic movement by NC coupled to the top horizontal spindle.
The feed speed can be stepless adjusted by means of an inverter. Feed rollers are driven by universal joints and gearbox drive. An idle roller placed on the outfeed table improves the feed when dealing with
particular machined sections. Shafts and feed rollers made of steel with hardened surface and standard pneumatic pressure.

"SET UP" quick adjustment system
The picture refers the composition 5 It is a patented, exclusive SCM device allowing very easy and quick set-up with every tool change.
The right and left vertical spindles (on request also top horizontal spindle) are equipped with the "SET UP" quick adjustment system, which allows the set-up of the machine in one single step.
It is enough to set the minimum tool diameter (in case of a top horizontal spindle), and the tool itself, working thickness, front/rear pressures, feed rollers are automatically adjusted.

Working unit positioning
All working unit adjustments are controlled from the machine front with
mechanical digital readout of position and decimal precision of work section.

Ergonomics
All controls are placed on the machine front at a suitable height for easy use. The integral safety enclosure ensures low emission of noise and dust guaranteeing a full view of the machine at the same time.

Preconfigured Versions

• R4.22.06: profiset 60 composition 4
• N.B.: It is compulsory to select the brake for motors
• R4.22.07: profiset 60 composition 5
• N.B.: It is compulsory to select the brake for motors

Standard Equipment

• 5 to 25 m/min variable feed speed by inverter
• Pneumatic pressure for feed rollers
• Top feed unit fitted in front of surface planer

Technical Specification

• Minimum working width (finished section): 25mm (15mm option)
• Maximum working width (finished section): 230mm
• Minimum working height (finished section): 6mm
• Maximum working height (finished section): 120mm
• Minimum length of single component - composition 4: 450mm (430mm option)
• Minimum length of single component - composition 5: 630mm (420mm option)
• Variable feed speed with inverter: 5 - 25 m/min
• Feed motor power: 3 kW (4 Hp)
• Planer spindle motor power: 4 kW (5.5 Hp)
• Vertical spindles motor power (single): 5.5 kW (7.5 Hp)
• Top horizontal spindle motor power: 4 kW (5.5 Hp)
• Bottom horizontal spindle motor power - composition 5: 4 kW (5.5 Hp)
• Universal spindle motor power (option): 4 kW (5.5 Hp)
• Spindles speed: 6000 rpm
• Spindles diameter: 40mm
• Vertical spindles length: 140mm
• Horizontal spindles length: 250mm
• Universal spindles length (option): 240mm
• Axial adjustment of vertical spindles with respect to the worktable: 40mm
• Axial adjustment of horizontal spindles with respect to the right fence: 40mm
• Min./max. tool diameter on surface planer: 120 - 140mm
• Min./max. tool diameter on vertical spindles: 100 - 180mm
• Max. profiling capacity on vertical spindles: 40mm
• Min./max. tool diameter on top horizontal spindle: 125mm (100-180mm opt.)
• Min./max. tool diameter on 2nd bottom horizontal spindles: 100 - 180mm
• Profiling capacity with tool 180mm on 2nd bottom horizontal spindles: 15mm
• Min./max. tool diameter on universal spindle (option): 100 - 180mm
• Feed rollers diameter: 140mm
• Infeed table length: 2000mm
• Rapid adjustment of infeed table and fence: 10mm
• 2 feed rollers 140 x 25mm for each feed hub: STD
• Manual pump for table lubrication: STD
• Manual centralised lubrication: STD

Optional Extras

• 11.12.29: 220 volt version

Options for machining units

• 97.00.12: Automatic star-delta start for motors with 4 kW (5.5 HP) and 5.5 kW (7.5 HP) motors power
• 11.12.23: Increased motor powers: composition 5
• 5.5 kW planer spindle (7.5 HP);
• 11 kW (15 HP) right/left vertical spindle
• 7.5 kW (10 HP) top horizontal spindle
• 5.5 kW (7.5 HP) bottom horizontal spindle
• 11.12.24: Increased motor powers: composition 4
• 5.5 kW planer spindle (7.5 HP);
• 11 kW (15 HP) right/left vertical spindle
• 7.5 kW (10 HP) top horizontal spindle
• 11.12.25: Increased motor powers: composition 5
• 5.5 kW (7.5 HP) planer spindle;
• 7.5 kW (10 HP) right/left vertical spindle
• 7.5 kW (10 HP) top horizontal spindle
• 5.5 kW (7.5 HP) bottom horizontal spindle
• 11.12.27: Increased motor powers: composition 4
• 7,5 kW (10 HP) right/left vertical spindle
• 5,5 kW (7.5 HP) top horizontal spindle
• 11.12.28: Increased motor power for universal spindle
• 7.5 kW (10HP) instead of 4kW (5.5 HP) motor
• 90.10.48: Kit for enabling profiling with the top spindle
  
  • 100 - 180mm min./max. tool diameter
  • 40 mm axial stroke
  • 2 mechanical readouts with decimal precision
• 88.08.35: T-SET rapid tool locking device each. It ensures the locking/unlocking of tools simply through a gun with compressed air.

Options for feed system

• 32.14.00: Second flanged feed roller opposite left vertical spindle
  20mm roller width. It enables the reduction of the feed centre distance from 450 mm to 430 mm in the composition 4.
• 23.15.83: Feed unit - Composition 5
  
  • Placed after top horizontal spindle. It enables the reduction of the feed centre distance from 630 mm to 450 mm. When the flanged feed roller is selected in front of the left spindle (code 32.14.00), the centre distance becomes 420mm
• 23.15.84: Tandem feed unit before universal spindle with rapid exclusion
  
  • N.B.: Universal spindle is compulsory
• 31.13.15: Vertical pressure with idle roller placed in front of right spindle
• 31.13.16: Vertical pressure with idle roller placed in front of left spindle
• 32.14.04: Kit of supplementary flanged feed rollers in front of left vertical spindle. It includes:
  
  • 2 steel feed rollers, 20 mm wide
  • 2 distance rings, 40 mm wide
• 32.16.00: Supplementary steel feed roller 140 x 25mm each
• 32.16.07: Supplementary flanged steel feed roller 140 x 20mm each
• 32.16.08: Supplementary rubber coated feed roller 140 x 25mm each
• 32.16.09: Supplementary flanged rubber coated feed roller 140 x 20mm each

Options for table and fences

• 29.13.99: 2500mm infeed worktable
• 88.06.34: Supplementary worktable with rexilon inserts - composition 5
  
  • Opposite last bottom horizontal spindle for profiling or splitting with sawblades diameter more than 15mm depth
    
    • 180mm max. tool diameter
    • 40mm profiling capacity
• 19.14.28: Kit for min. working width from 25 to 15mm
  
  • 125 mm min. tool diameter on left vertical spindle

Universal spindle and options

• 90.10.33: Universal spindle. Features:
  
  • 240 x 40mm spindle length
  • 6000 rpm speed
  • 4 kW (5.5 HP) motor power
  • 100 - 180mm min/max. tool diameter
  • outfeed worktable with 1 spacer
  • 2 idle pressure shoes
  • 3 mechanical decimal readouts
• 31.13.17: Front and rear pressure shoes on universal spindle hood for planning/profiling as with top horizontal spindle

Tools

• 65.10.29: Kit of planer cutterheads and reference engraver for light-duty machining. It includes:
  
  • reference engraver diameter 150 x 40 x 12mm with 2 knives
  • 2 planer cutterheads for horizontal spindles diameter 125 x 235 x 40mm with 4 knives
  • 2 planer cutterheads for vertical spindles diameter 25 x 135 x 40mm with 4 knives
• 65.10.31: Kit of planer cutterheads and reference engraver for heavy-duty machining. It includes:
  
  • reference engraver diameter 145 x 40 x 12mm, with 4 knives
  • 2 planer cutterheads for horizontal spindles diameter 125 x 230 x 40mm with 4 knives
  • 2 planer cutterheads for vertical spindles diameter 125 x 130 x 40mm with 4 knives
• 96.14.73: PRESET 25: tool diameter measurement device. It ensures a centesimal accuracy

Safety Protections

• 50.02.40: European safety regulations (C.E. norms)
  
  • N.B.: Brakes for motors is compulsory
• 27.12.53: Brake for 3 motors - composition 4
• 27.12.54: Brake for 4 motors - composition 5
• 27.12.49: Brake for universal spindle
  
  • N.B.: Universal spindle is compulsory