Sedgwick SM210 Spindle Moulder with 210mm capacity.

Construction

A cast iron table mounted on a heavy duty steel cabinet provides maximum timber support and a stable and accurate base for anchoring the spindle, motor housing, and rise & fall mechanism. All tables feature an anti-friction planed finish. The bearing housing, rise & fall assembly and motor mountings are also in machined cast iron. The spindle is belt driven by an industrial motor and runs in “sealed for life” bearings, which require only minimal maintenance.

Ease of Operation

The spindle rise and fall mechanism is operated by a handwheel at the front of the machine, and the spindle height read from an adjacent scale. The SM210 features a cast iron ‘horseshoe’ type assembly with independently adjustable precision-ground fence plates and movement indicators. Changeover between the four spindle speeds is effected by quick and easy belt re-positioning. A viewing panel showing pulley speed is incorporated.

Versatility

The machine’s removable spindle allows the operator to select between 30mm and 11/4” dia. spindles, as well as offering the flexibility of optional router or tenoning spindles.

Safety Features:

• The machine is equipped with a fabricated steel cutter guard and a robust shaw guard set with hexagonal mountings and steel ratchet handles.
• Twin outlets facilitate dust extraction from both the cutter well and fence locations.
• Additional safety features include:
  • automatic braking
  • starter with thermal overload no volt release protection
  • lock-off emergency stop
  • lockable isolator
  • electronically interlocked door
  • a footstop and a socket for a power feed unit

Technical Data:

• Table dimensions (L x W x H): 850 x 650 x 880 mm
• Max. cutterblock diameter: 125 mm
• Max. profiling cutter diamter: 210 mm
• Max. cutter weight: 4 kg
• Max. retractable tool size: 150 x 105 mm
• Spindle diamter: 30 mm (Optional 11/4”)
• Spindle length: 125 mm
• Spindle speeds: 3000 / 4500 / 6000 / 8000 rpm
• Spindle stroke: 100 mm
• Fence plates (H x L): 125 x 400mm
• Dust extraction outlets: 150 mm & 100 mm
• Total air volume required: 1870 CMH
• Voltage / frequency: 3 Phase + Earth; 400 / 230v – 50 / 60 Hz
• Voltage / frequency: 1 Phase + N + Earth; 230V - 50 / 60 Hz
• Motor rating: 3 Phase 2.2Kw IE2 (S1); 1 Phase 2.2Kw
• Motor full load current in amps: 3 Phase 4.4A; 1 Phase 15.4A
• Starting current in amps: 3 Phase 26.4A; 1 Phase 92.4A
• Required full size in amps: 3 Phase 20A/ph; 1 Phase 40A
• Required cable size: 3 Phase 2.5 mm²; 1 Phase 4.0 mm²
• Packed dimensions (L x W x H): 1020 x 680 x 1420 mm
• Nett weight: 230 kg

Optional Accessories:

• Sliding Table: To provide a stable moving platform for tenoning etc. The table is manufactured in steel tube, and runs on precision-ground case-hardened rollers and bearings. A mitre fence with 90 - 45° adjustment, timber stop and cam action timber clamp are all incorporated.
• Tenoning Hood: To provide protective covering and a point of extraction (100mm) for cutters up to 350mm dia. The lid and visor are both adjustable, and feature a carrying handle.
• Table Extensions: To provide increased support for long work-pieces. Manufactured in strong sheet steel, a set of two extends the table length by 1000mm.
• Stub Spindle: For use with counterbored cutterheads.
• Router Spindle: The router spindle is quickly interchanged, without disturbing the main spindle or bearings. Particularly valuable when machining small pieces, the unit comes with a 1/2” collet, nut and spanner.
• Ring Fence and Safety Guard: For safe machining of curved work-pieces. This fully adjustable heavy-duty guard comes with a 6 1/4” ring, two adjustable visors, a foot which is bolted to the table, a 12” upright, and a 7” cross bar.