Stihl FS 70 C-E Robust Petrol Brushcutter with Ergostart and AutoCut 25-2 Cutting Head

Robust 0.9 kW petrol brushcutter with ErgoStart and bike handle

Extremely robust 0.9 kW petrol brushcutter with bike handle. 2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass.

Standard Features:

Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

Bike handle
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

Multi-function control handle
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

Technical Specification:

• Displacement: 27.2 cm³
• Displacement: 1.66 cu-in
• Engine power: 1 kW
• Engine power: 1.2 HP
• Engine power: 1.2 bhp
• Weight: 5.4 kg 1)
• Weight: 11.9 lb 1)
• Sound pressure level: 94 dB(A) 2)
• Sound pressure level: 94 dB(A) 2)
• Sound power level: 108 dB(A) 2)
• Sound power level: 105 dB(A)
• Sound power level: 107 dB(A) 2)
• Sound power level: 104 dB(A)
• Vibration level, left: 7 m/s² 3)
• Vibration level, right: 5.5 m/s² 3)
• Vibration level, left: 6.6 m/s² 3)
• Vibration level, right: 6.6 m/s² 3)
• Overall length: 170 CM 4)
• Cutting circle diameter: 420 mm
• Tank capacity: 0.34 l
• CO2: 829 g/kWh

1)Without fuel, cutting tool and without protection2)K-factor according to DIR 2006/42/EC = 2.5 dB (A)3)K-factor according to DIR 2006/42/EC = 2m / s ²4)Without cutting tool