Stihl MS 151 TC-E Arborist Petrol Chainsaw 12 inch Bar 23.6cc

MS 151 TC-E Petrol Chainsaw: STIHL's lightest top-handle chainsaw

This upgraded version of the MS 151 features a new 2-MIX engine that consists of a new cylinder, piston and exhaust. These changes mean there is an increase in power of the saw by up to 1.05 kW and a 15% increase in torque to 1.1 Nm - all while retaining the lightweight nature of the saw.

Fitted with a manual fuel pump and STIHL's ErgoStart (E) technology, this saw is easy to start-up so you can get on with the job straight away.

Features:

Side-Mounted Chain Tensioning
Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.

Stihl Ergostart
STIHL ErgoStart saves you energy when starting your power tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An additional spring between the crankshaft and the starter cord roll makes this easier.

Manual Fuel Pump
The manual fuel pump reduces the number of strokes required to start the power tool, making the start-up process quicker and easier This is particularly helpful after longer breaks in operation. To use it, actuate the pump several times before starting. This will ensure that there is enough petrol in the system when starting.

Service-Friendly Air Filter System
The shroud has been practically designed to be opened with just one movement and without tools. This makes it easier to clean your chainsaw’s air filter.

Compensator
The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.

Tool-Free fuel Cap For Oil And Fuel Tanks
With tool-free fuel cap, you can open and close oil and fuel tanks in just a few simple steps, thanks to a bayonet closure.

Advanced Combustion Technology
Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.

Fold-Out Hook
Thanks to the fold-out hook, you can attach the tool to a suspension rope, then pull it up into the treetop or lower it down from there. You can also use it to secure the power tool. When folded away, the hook does not interfere with work or storage.

Stihl 2-Mix Engine
With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.

Stihl Anti-Vibration System
Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

Technical Specifications:

• Displacement: 23.6 cm³
• Power: 1.10 kW
• Engine power: 1.50 HP
• CO2: 886 g/kWh
• Device weight without refuelling: 2.6 kg 1)
• System weight without refuelling: 2.92 / 2.97 kg 2)
• Power-to-weight ratio: 2.40 kg/kW
• Bar length: 25 / 30 cm 3)
• Bar length: 10 / 12 in 3)
• Groove width: 1.10 mm
• Groove width: 43 in
• Saw chain pitch: 1/4"P
• Device length with bumper spike: 243 mm 1)
• Sound pressure level: 96 dB(A) 4)
• Sound power level: 107 dB(A) 4)
• Vibration level left: 4.9 m/s² 5)
• Vibration level right: 4.9 m/s² 5)

1. without guide bar and saw chain
2. with guide bar and saw chain
3. The actual cutting length is shorter than the specified bar length
4. K-value according to Directive 2006/42/EC = 2.0 dB(A)
5. K-value according to RL 2006/42/EG = 2 m/s²