Trend - 1000mm Worktop Jig [COMBI1002]

Trend - 1000mm Worktop Jig [COMBI1002]

• For up to 1000mm wide worktop now with cable tidy insert & circular hinge cut apertures.
• A single male and female template in 16mm solid laminate.
• Facility to join boards from 450mm to 1000mm wide.
• Facility to cut 22.5 degree mitre corners for hob units.
• Intergral template slots for rounding and mitring of peninsular worktop corners for cable tidy inserts and a circular concealed hinge aperture and 3/4 inch BSP holes for mixer taps.
• Three alloy location bushes and a width-setting stop.
• Colour coded pin location for quick and easy use.
• Three bolt recess slots for connection bolts.
• Cuts out of square joints (max. 3 degrees).
• Jig requires:
• A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
• A template guide bush with 30mm outside diameter.
• A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
• Two 100mm (4 inch) throat clamps.

• Length=1200 mm
• Height=376 mm
• Width=16 mm
• Weight=9.6kg
• End cut=45 degrees
• Corner Mitre Joint=22.5 degrees
• Circular Hinge diameter=35 mm

Dewalt

• All products are covered by one year warranty (XR Lithium Ion range has three years warranty when tool is registered online)
• Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Makita UK

• All 18 Volt products range are covered by three year warranty. (when tool is registered online)
• Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
• Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Festool

• All products are covered by Festool's extended three year warranty. (when tool is registered online)
• Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
• Product must have been registered online for the extended 3 year warranty (usually done by supplier)
• Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Trend

• All products are covered by one year warranty
• Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
• Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Scheppach

• All products are covered by one year warranty
• Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
• Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Mafell

• All products are covered by Mafells 3 year warranty when the product is registered online at www.mafell-garantie.de/login.jsp
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Stihl

• All Stihl petrol machinery is covered by one year warranty.
• All Stihl petrol machinery is checked & tested at the point of purchase.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Bosch

• All products are covered by Bosch one year warranty. Customer can register product online at Bosch to receive extended three year warranty.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

For any other warranty queries please call 0141 429 4444

DELIVERY:

We aim to deliver every parcel within 48 hours from the date of ordering. Most of the time you will receive your parcel the following day if ordered before 2:30pm but sometimes things are outwith our control (traffic, road accidents, bad weather etc.) in these circumstances we ask that you be patient with us, if your delivery is late please call us and we will investigate the situation for you. Most parcels will be delivered by Parcelforce and may require a signature upon delivery.

We deal with many stockists and sometimes we rely on their delivery times to fulfil your order, we take every care to ensure that your product is delivered within the time stated we take no responsibility for third parties and will incur no liability for any late delivery. If you have any questions or concerns regarding the delivery of an item please call us.

Mainland UK

• Standard FREE delivery on orders over £80 + vat (excludes heavier items)
• £7.30 + vat for orders under £80 + vat
• Heavier goods* carriage will be added at checkout

Non Mainland UK & Northern Ireland

• Standard delivery charged at £14.95 (excludes heavier items)
• For Heavier goods please call 0141 429 4444 for pricing as this depends on geological location. Competitive pricing available.

Republic of Ireland

• Standard delivery charged at £18.95 (excludes heavier items)
• For Heavier goods please call 0141 429 4444 for pricing as depends on location. Competitive pricing available.

Please note:

• For price and availability of industrial machinery call 0141 429 4444 or fill out the contact form.
• Stihl machinery is only available for collection only.
• Prices exclude VAT by default but you can change this by clicking on the VAT switcher at the top of the page if you want to see prices including VAT.

*Some heavier goods may still have free delivery, this will be stated at checkout.

RETURNS:

Terms and Conditions

• In the unlikely event that an item does not meet your expectations or is faulty or damaged when you receive it, you can obtain a replacement or full refund – provided the product is returned unused in its original packaging and includes any accessories provided as well as any items provided free of charge or as part of a package deal within 14 days of your purchase. Your statutory rights are not affected. Goods must be returned at customer’s expense unless otherwise agreed with a Saw Centre employee.