Used Emmegi Lilliput 320 Automatic End Milling Machine
The Used Emmegi Lilliput 320 Automatic End Milling Machine with profile support roller conveyor and swarf drawer is a horizontal end milling machine with electropneumatic feed. It has milling of intermediate angles, +45° / 90° / -45°. High tool speed 6000 rpm, for improved standard of machining on the painted profile and with intermediate angles. Quick tool change with pneumatic control. Scratch-proof table. Full guarding of work zone with ample internal visibility.
Used Emmegi Lilliput 320 Automatic End Milling Machine with profile support roller conveyor and swarf drawer
01 Profile support roller conveyor
The profile support roller
conveyor allows correct
positioning in the
machine and secure
resting of the profile in
the work zone. The feed
rolls facilitate the profile
handling operations.
02 Swarf drawer
A swarf drawer at the bottom
of the machine allows
collecting the swarf caused by
machining, thus facilitating
cleaning operations.
03 Control
The push
buttons/switches on the
machine control panel
allow: air blast for
cleaning the clamp base,
start-up with safety switch
and quick tool change.
04 Clamps and intermediate angles
Both horizontal and
vertical clamps are both
operated pneumatically
and with low pressure
device.
Intermediate angles are
obtained thanks to the
possibility of varying the
angle of tilt from –45° to
+45° with manual
movement. The position
is read on the metric
rule or graduated scale.
05 Positive indexing stop
Adjustable 6-position
positive indexing stop,
provided with a device to
allow automatic removal
from the workpiece thus
ensuring mechanical and
aesthetic intactness of the
profile.
TECHNICAL SPECIFICATIONS
- Brake motor: 1.5 kW
- Tool speed: 6000 rpm
- Travel 300 mm
- Clamp capacity: 200x120 H mm
- Horizontal and vertical pneumatic clamps with low pressure device
- 6-position positive indexing depth stop
- Cutter holder sleeve dia. 27/32x160 mm
- Max. cutter dia.: 180 mm
- Spray-mist lubrication system with water and oil emulsion
- Predisposition for fume exhauster connection
- Base with tool magazine and swarf drawer
- Profile support roller conveyor L=500 mm
- Air blast for cleaning clamp base
- Compressed air gun for cleaning
- Dimensions (mm) 1270 x 720 x 1450
- Weight Kg 190
UK Mainland Delivery
We try our best to dispatch all stock orders same day on a on a next day service. Dispatch times may vary depending on your geographical location and items ordered.
For full terms and conditions please visit our Delivery & Returns page.
We have strived to maintain the lowest possible prices for delivery for our customers that we can, however rising courier costs have made this near impossible and these costs now exceed what we are charging. So for the first time in four years we are raising our delivery cost from £5.83 ex vat to £7.00 ex vat. We are also raising our minimum order value for free delivery from £50.00 ex vat to £75.00 ex vat. We hope that this does not affect your decision to purchase from our website, you will always receive the same high level of service that we offer all customers.
Stock orders received before 12pm Monday to Friday will be processed and dispatched the same working day (this excludes items that are made to order or sent direct).
Orders received after 12pm Monday to Friday will be processed and dispatched the next working day.
Standard delivery via courier is free for orders over £75.00 ex vat and under 30kg in weight.
Orders under £75.00 ex vat and 30kg in weight are subject to a standard £7.00 ex vat handling and packaging fee.
Orders over 30kg will be subject to courier or volumetric surcharges.
Orders sent direct from our suppliers are dispatched in accordance to supplier delivery terms.
| Supplier | Estimated Delivery Times |
|---|---|
| Laguna | 2 - 3 working days for light items, 7 - 10 working days for heavy items |
| Charnwood | 2 - 3 working days, Charnwood will contact you to arrange delivery |
| Mirka* | Wide Belts - Manufactured to order: 7 – 10 working days |
| SIA Abrasives* | Wide Belts - In stock belts: 2 - 3 working days Wide Belts - Manufactured to order: 7 – 10 working days Wide Belts - Out of stock belts: 4 - 6 weeks |
| Swedex | 1 – 2 working days for in stock products |
| Trend | 1 – 2 working days for in stock products |
| Calibre Tooling | 1 – 2 working days for in stock products |
| Marcrist | 1 – 2 working days for in stock products |
