View your shopping bag ›

My Account

  • Items. (0)
  • £0.00 (ex. VAT)

Checkout

Sedgwick Planer Thicknesser 255 x 180mm PT

Item in stock

    MPN: n/a

    TSC: n/a

From £3,260.00 (ex. VAT)
(Delivery from )
£3,260.00 (ex. VAT)
Add to Basket Make an enquiry about
Sedgwick
Secure Payment
  • 100% Secure
  • Item In Stock
  • Next Day Delivery
Sedgwick Planer Thicknesser 255 x 180mm PT

Construction
 
The Sedgwick PT255 planer thicknesser is designed and built for precision, long life and minimum maintenance. Its rigid mainframe assembly (cast iron base, side frames, and fixed outfeed table) gives exceptional stability, and accurately houses the feed and cutterblock bearings, and the infeed and thicknessing tables.
 
The Cutterblock
 
A large diameter three knife TERSA cutterblock provides improved finish, and runs in ‘sealed for life’ bearings for minimum maintenance.
 
Driving the cutterblock is an industrial motor via a heavy section vee belt which, combined with the centrifugal force of the large diameter block, provides ample power.
 
Surface Planing
 
The cast infeed table rises and falls in square gibs for long term accuracy, and is fitted with a rule showing depth of cut. A generously proportioned cast iron fence is then mounted off the table on a cast iron bracket. The fence can be tilted between 90º – 45º making it suitable for bevel work and chamfering, and is easily returned to 90º via a positive stop. Adjustable shaw guards are also supplied.
 
Thicknessing
 
For long term accuracy, and to avoid time consuming mode changes, the surfacing tables remain in place when thicknessing, utilising instead a dual function chip collection hood.
 
The thicknessing table is again cast iron and is mounted on a large diameter precision ground pillar to ensure precise and parallel positioning, with an off-centre lock for added rigidity. The steel feed rollers (one spiral-fluted the other rubber-coated) run in self-lubricating bushes and are driven by a heavy duty chain for efficient and constant feeding of demanding production work and difficult stock.
 
Safety Features
 
The drive assembly is totally enclosed by the rear machine guard, removal of which provides easy access to the motor drive assembly for any necessary maintenance. The cutterblock is guarded at the rear by a fixed guard attached to the fence, and at the front by a bridge type guard.
 

Features and Benefits:

  • Rigid mainframe assemblies (castiron base, side frames, and fixed outfeed table) give exceptional stability, and accurately house the feed and cutterblock bearings, and the infeed and thicknessing tables.
  • Cutterblock has ‘sealed for life’ bearings for minimum maintenance.
  • Knife setting is aided by height adjustment screws.
  • The fence can be tilted between 90º - 45º making it suitable for bevel work and chamfering,
    and is easily returned to 90º via a positive stop. Adjustable shaw guards for
    rebating are also supplied.
  • For long term accuracy, and to avoid time consuming mode changes, the surfacing
    tables remain in place when thicknessing, utilising instead a dual function
    chip collection hood.
  • The drive assembly is totally enclosed by the rear machine guard, removal ofwhich provides easy access to the motor drive assembly for any necessary maintenance. The cutterblock is guarded at the rear by a fixed guard attached to the fence, and at the front by a bridge type guard.

 Specification:

  • Surface capacity: 255 mm
  • Thicknessing width: 255 mm
  • Thicknessing depth: 180 mm
  • Rebate depth: 13 mm
  • Surface table length: 1200 mm
  • Infeed table length: 600 mm
  • Surface table length: 830 mm
  • Thickness table length: 600 mm
  • Cuttterblock dia: 80 mm
  • Cutter block knives: 2
  • Feed roller dia: 40 mm
  • Feed speed: 3 PHASE 5.5 m/min (1 PHASE) 6 m/min
  • Fence size: 550 x 90 mm
  • Cutter block motor: 3 PHASE 1.5 kW (1 PHASE) 1.5 kW
  • Net Weight: 195 kg
  • Extraction outlet dia: 125mm
  • DIMENSIONS L x W x H: 1400 x 800 x 1160 mm

Specification:

  • Surface capacity: 255 mm
  • Thicknessing width: 255 mm
  • Thicknessing depth: 180 mm
  • Rebate depth: 13 mm
  • Surface table length: 1200 mm
  • Infeed table length: 600 mm
  • Surface table length: 830 mm
  • Thickness table length: 600 mm
  • Cuttterblock dia: 80 mm
  • Cutter block knives: 2
  • Feed roller dia: 40 mm
  • Feed speed: 3 PHASE 5.5 m/min (1 PHASE) 6 m/min
  • Fence size: 550 x 90 mm
  • Cutter block motor: 3 PHASE 1.5 kW (1 PHASE) 1.5 kW
  • Net Weight: 195 kg
  • Extraction outlet dia: 125mm
  • DIMENSIONS L x W x H: 1400 x 800 x 1160 mm

Dewalt

  • All products are covered by one year warranty (XR Lithium Ion range has three years warranty when tool is registered online)
  • Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Makita UK

  • All 18 Volt products range are covered by three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Festool

  • All products are covered by Festool's extended three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Product must have been registered online for the extended 3 year warranty (usually done by supplier)
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Trend

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Scheppach

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Mafell

Stihl

  • All Stihl petrol machinery is covered by one year warranty.
  • All Stihl petrol machinery is checked & tested at the point of purchase.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Bosch

  • All products are covered by Bosch one year warranty. Customer can register product online at Bosch to receive extended three year warranty.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

For any other warranty queries please call 0141 429 4444

DELIVERY:

We aim to deliver every parcel within 48 hours from the date of ordering. Most of the time you will receive your parcel the following day if ordered before 2:30pm but sometimes things are outwith our control (traffic, road accidents, bad weather etc.) in these circumstances we ask that you be patient with us, if your delivery is late please call us and we will investigate the situation for you. Most parcels will be delivered by Parcelforce and may require a signature upon delivery.

We deal with many stockists and sometimes we rely on their delivery times to fulfil your order, we take every care to ensure that your product is delivered within the time stated we take no responsibility for third parties and will incur no liability for any late delivery. If you have any questions or concerns regarding the delivery of an item please call us.


Mainland UK

  • Standard FREE delivery on orders over £80 + vat (excludes heavier items)
  • £7.30 + vat for orders under £80 + vat
  • Heavier goods* carriage will be added at checkout


Non Mainland UK & Northern Ireland

  • Standard delivery charged at £14.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as this depends on geological location. Competitive pricing available.

Please note:

  • For price and availability of industrial machinery call 0141 429 4444 or fill out the contact form.
  • Stihl machinery is only available for collection only.
  • Prices exclude VAT by default but you can change this by clicking on the VAT switcher at the top of the page if you want to see prices including VAT.

*Some heavier goods may still have free delivery, this will be stated at checkout.


RETURNS:

Terms and Conditions

  • In the unlikely event that an item does not meet your expectations or is faulty or damaged when you receive it, you can obtain a replacement or full refund – provided the product is returned unused in its original packaging and includes any accessories provided as well as any items provided free of charge or as part of a package deal within 14 days of your purchase. Your statutory rights are not affected. Goods must be returned at customer’s expense unless otherwise agreed with a Saw Centre employee.