View your shopping bag ›

My Account

  • Items. (0)
  • £0.00 (ex. VAT)

Checkout

Sedgwick TA450 450mm Tilt Arbor Sawbench

Item in stock

    MPN: n/a

    TSC: TA450

£4,536.00 (ex. VAT)
(Delivery from )
£4,536.00 (ex. VAT)
Add to Basket Make an enquiry about
Sedgwick
Secure Payment
  • 100% Secure
  • Item In Stock
  • Next Day Delivery

Sedgwick TA450 Tilt Arbor Sawbench.


Features and Benefits:

Ease of operation - The backbone of a joinery workshop is its sawbench. It should be powerful, accurate, reliable and simple and safe to operate. The Sedgwick range of saws is designed with this in mind, and offers outstanding value for money. Their strength is in their construction, precision engineering, and our insistence on using only the best quality components.

Construction - A large cast iron table mounted on a heavy duty steel cabinet provides maximum timber support and a stable and accurate base for anchoring the spindle, rise and fall, and tilt mechanisms. The spindle is powered by a high efficiency IE2 industrial rated motor via a three belt drive, and features large diameter saw flanges for blade stability. It runs in ‘sealed for life’ bearings mounted in a cast iron housing, and requires only minimal maintenance. Rise and fall and tilt mechanisms are square thread screws operated by handwheels at the front and side of the machine. Both are easily accessible.

Versatility - The rip fence is aluminium section, allowing for two working positions (ripping and angled ripping) and for movement fore and aft in relation to the sawblade. It is fixed to a heavy duty cast iron mounting bracket for rigidity, and has integral micro adjustment. The assembly runs on a nylon roller, gliding easily across the beds, and is supported by a 40mm diameter solid steel bar for rigidity, which gives 915mm capacity from the sawblade (an optional RH extension table is available to increase this to 1220mm).

Optional Cross Cut Table - Designed for cutting mitres and compound angles, end trimming, squaring, dividing and trimming, the Cross Cut Table is supported on the RHS by precision ground, case hardened bearing rollers running on a 40mm diameter solid steel bar, and on the LHS by a cast jib. The fence is aluminium section and features a telescopic arm, a flip over stop, and a quadrant scale (90o - 45o).

Safety Features:

  • Polycabonate overhead sawguard with 100mm dia Extraction Outlet
  • Electro-magnetic Braked Motor
  • Thermal overload no volt release protection
  • Lock off emergency stop Button
  • Lock off emergency foot switch
  • Lockable isolator

Technical Specification:

Saw Blade Diameter: 450 mm

Saw Blade Bore: 30 mm

Saw Blade Projection: 155 mm @ 90°, 105 mm @ 45°

Spindle Speed: 3000 rpm

Size Of Table (Length X Width): 1125 X 1000 mm

Table Height: 855 Mm

Distance Saw To Fence: 915 mm

Fence With Micro Adjustment: 825 X 100 mm

Dust Extraction Outlet Machine: 150 mm, 100 mm

Total Air Volume Required: 1870 CMH

Voltage/Frequency: 3 Phase + Earth; 400/230 V – 50/60 Hz

Motor Rating: 5.5 Kw IE2 (S1)

Motor Full Load Current In Amps: 11.5 A

Starting Current In Amps: 69 A

Required Fuse Size In Amps: 25 A/Ph

Required Cable Size: 4mm2

Packed Dimensions LxWxH: 1300 X 1400 X 1250 mm

Nett Weight: 468 Kg

OPTIONAL 610mm CROSS CUT TABLE:

Size Of Table (Length X Width): 600 X 350 mm

Distance Saw To Mitre Fence: 610 mm

OPTIONAL RIGHT HAND EXTENSION TABLE:

Size Of Table (Length X Width): 800 X 700 mm

Distance Saw To Rip Fence: 1220 mm

OPTIONAL REAR TAKE OFF TABLE:

Size Of Table (Length X Width): 800 X 700 mm

 

Sedgwick TA450 Tilt Arbor Sawbench.


Features and Benefits:

Ease of operation - The backbone of a joinery workshop is its sawbench. It should be powerful, accurate, reliable and simple and safe to operate. The Sedgwick range of saws is designed with this in mind, and offers outstanding value for money. Their strength is in their construction, precision engineering, and our insistence on using only the best quality components.

Construction - A large cast iron table mounted on a heavy duty steel cabinet provides maximum timber support and a stable and accurate base for anchoring the spindle, rise and fall, and tilt mechanisms. The spindle is powered by a high efficiency IE2 industrial rated motor via a three belt drive, and features large diameter saw flanges for blade stability. It runs in ‘sealed for life’ bearings mounted in a cast iron housing, and requires only minimal maintenance. Rise and fall and tilt mechanisms are square thread screws operated by handwheels at the front and side of the machine. Both are easily accessible.

Versatility - The rip fence is aluminium section, allowing for two working positions (ripping and angled ripping) and for movement fore and aft in relation to the sawblade. It is fixed to a heavy duty cast iron mounting bracket for rigidity, and has integral micro adjustment. The assembly runs on a nylon roller, gliding easily across the beds, and is supported by a 40mm diameter solid steel bar for rigidity, which gives 915mm capacity from the sawblade (an optional RH extension table is available to increase this to 1220mm).

Optional Cross Cut Table - Designed for cutting mitres and compound angles, end trimming, squaring, dividing and trimming, the Cross Cut Table is supported on the RHS by precision ground, case hardened bearing rollers running on a 40mm diameter solid steel bar, and on the LHS by a cast jib. The fence is aluminium section and features a telescopic arm, a flip over stop, and a quadrant scale (90o - 45o).

Safety Features:

  • Polycabonate overhead sawguard with 100mm dia Extraction Outlet
  • Electro-magnetic Braked Motor
  • Thermal overload no volt release protection
  • Lock off emergency stop Button
  • Lock off emergency foot switch
  • Lockable isolator

Technical Specification:

 

Saw Blade Diameter: 450 mm

Saw Blade Bore: 30 mm

Saw Blade Projection: 155 mm @ 90°, 105 mm @ 45°

Spindle Speed: 3000 rpm

Size Of Table (Length X Width): 1125 X 1000 mm

Table Height: 855 Mm

Distance Saw To Fence: 915 mm

Fence With Micro Adjustment: 825 X 100 mm

Dust Extraction Outlet Machine: 150 mm, 100 mm

Total Air Volume Required: 1870 CMH

Voltage/Frequency: 3 Phase + Earth; 400/230 V – 50/60 Hz

Motor Rating: 5.5 Kw IE2 (S1)

Motor Full Load Current In Amps: 11.5 A

Starting Current In Amps: 69 A

Required Fuse Size In Amps: 25 A/Ph

Required Cable Size: 4mm2

Packed Dimensions LxWxH: 1300 X 1400 X 1250 mm

Nett Weight: 468 Kg

OPTIONAL 610mm CROSS CUT TABLE:

Size Of Table (Length X Width): 600 X 350 mm

Distance Saw To Mitre Fence: 610 mm

OPTIONAL RIGHT HAND EXTENSION TABLE:

Size Of Table (Length X Width): 800 X 700 mm

Distance Saw To Rip Fence: 1220 mm

OPTIONAL REAR TAKE OFF TABLE:

Size Of Table (Length X Width): 800 X 700 mm

 

 

Dewalt

  • All products are covered by one year warranty (XR Lithium Ion range has three years warranty when tool is registered online)
  • Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Makita UK

  • All 18 Volt products range are covered by three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Festool

  • All products are covered by Festool's extended three year warranty. (when tool is registered online)
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
  • Product must have been registered online for the extended 3 year warranty (usually done by supplier)
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Trend

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Scheppach

  • All products are covered by one year warranty
  • Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
  • Please keep your TSC receipt as proof of purchase must be produced.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Mafell

Stihl

  • All Stihl petrol machinery is covered by one year warranty.
  • All Stihl petrol machinery is checked & tested at the point of purchase.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

Bosch

  • All products are covered by Bosch one year warranty. Customer can register product online at Bosch to receive extended three year warranty.
  • For any other information regarding warranties please email sales@thesawcentre.co.uk

For any other warranty queries please call 0141 429 4444

DELIVERY:

We aim to deliver every parcel within 48 hours from the date of ordering. Most of the time you will receive your parcel the following day if ordered before 2:30pm but sometimes things are outwith our control (traffic, road accidents, bad weather etc.) in these circumstances we ask that you be patient with us, if your delivery is late please call us and we will investigate the situation for you. Most parcels will be delivered by Parcelforce and may require a signature upon delivery.

We deal with many stockists and sometimes we rely on their delivery times to fulfil your order, we take every care to ensure that your product is delivered within the time stated we take no responsibility for third parties and will incur no liability for any late delivery. If you have any questions or concerns regarding the delivery of an item please call us.


Mainland UK

  • Standard FREE delivery on orders over £80 + vat (excludes heavier items)
  • £7.30 + vat for orders under £80 + vat
  • Heavier goods* carriage will be added at checkout


Non Mainland UK & Northern Ireland

  • Standard delivery charged at £14.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as this depends on geological location. Competitive pricing available.


Republic of Ireland

  • Standard delivery charged at £18.95 (excludes heavier items)
  • For Heavier goods please call 0141 429 4444 for pricing as depends on location. Competitive pricing available.


Please note:

  • For price and availability of industrial machinery call 0141 429 4444 or fill out the contact form.
  • Stihl machinery is only available for collection only.
  • Prices exclude VAT by default but you can change this by clicking on the VAT switcher at the top of the page if you want to see prices including VAT.

*Some heavier goods may still have free delivery, this will be stated at checkout.


RETURNS:

Terms and Conditions

  • In the unlikely event that an item does not meet your expectations or is faulty or damaged when you receive it, you can obtain a replacement or full refund – provided the product is returned unused in its original packaging and includes any accessories provided as well as any items provided free of charge or as part of a package deal within 14 days of your purchase. Your statutory rights are not affected. Goods must be returned at customer’s expense unless otherwise agreed with a Saw Centre employee.