Striebig 4D Vertical Panel Saw

The Striebig 4D represents the pinnacle in vertical panel saw technology. Effortless, one-person operation can optimize and cut a full-sized panel without the operator needing to re-handle it once it has been loaded on to the machine’s bed. Integrated intelligent cut optimization ensures fantastic levels of efficiency whilst minimising waste material, even for the most complicated panel and strip cutting work.

Features and Benefits:

• Full optimization ensures efficient material usage
• Automatic panel handling for ease of use, reduction of operator errors and prevention of damage to panel edges
• Low space requirements
• TRK* dust extraction limit values considerably below 1mg/m3
• Laser-supported display of the
• Automatic saw unit swivelling in
• vertical or horizontal cutting position
• Multilingual user interface
• Automatic saw unit plunging and withdrawal
• Electronic positioning system for horizontal cutting EPS
• Infinitely variable feed speed 10-25 m/min
• Digital measuring system DMS (both axes)
• 12” touchscreen colour display with touch&saw 2.0 operation
• Automatic saw beam locking with cutting point recognition
• Selectable saw cycle
• Automatic panel end recognition
• Pneumatic clutch for switching easily to manual mode
• Automatic riving knife movement

Premium Class Sawing Centre:

Each Striebig 4D is tailor-made for a customer’s individual needs, following in-depth consultation sessions. Thorough customizing is the order of the day with the wide variety of options available virtually endless, so as to significantly improve the sizing capabilities in your business. Delivering a cutting range of 5300 x 2100mm, the Striebig 4D comes with the option for cut depths of 80, 105 and 130mm.

Completely Autonomous: 

Once the panel is loaded, the 4D’s panel lowering and panel feeder units take care of all the material handling during cutting. The first intelligent cut optimization triggers an automatic cutting sequence, so operating the 4D is effortless. The operator simply loads the panels, presses the start button, removes the finished work pieces and positions them ready for further processing operations. Data can be entered via the intuitive touch screen or the 4D can be connected to customers’ own optimization software.

*TRK is the abbreviation for "Technische Richt-Konzentration" (Technical Target Concentration). These values have been applicable since July 1988 and specify the maximum permissible wood dust concentration at the workplace. The TRK value is 2 mg/m³ total dust based on a working average (shift) of 8 hours. Connection to an external dust extraction system is required. The system used must have an extraction performance of 20 m/sec. (vacuum approx. 2,000 Pa.) at the connector in order to meet the TRK specifications. 

The Striebig 4D represents the pinnacle in vertical panel saw technology. Effortless, one-person operation can optimize and cut a full-sized panel without the operator needing to re-handle it once it has been loaded on to the machine’s bed. Integrated intelligent cut optimization ensures fantastic levels of efficiency whilst minimising waste material, even for the most complicated panel and strip cutting work.

Features and Benefits:

• Full optimization ensures efficient material usage
• Automatic panel handling for ease of use, reduction of operator errors and prevention of damage to panel edges
• Low space requirements
• TRK* dust extraction limit values considerably below 1mg/m3
• Laser-supported display of the
• Automatic saw unit swivelling in
• vertical or horizontal cutting position
• Multilingual user interface
• Automatic saw unit plunging and withdrawal
• Electronic positioning system for horizontal cutting EPS
• Infinitely variable feed speed 10-25 m/min
• Digital measuring system DMS (both axes)
• 12” touchscreen colour display with touch&saw 2.0 operation
• Automatic saw beam locking with cutting point recognition
• Selectable saw cycle
• Automatic panel end recognition
• Pneumatic clutch for switching easily to manual mode
• Automatic riving knife movement

Premium Class Sawing Centre:

Each Striebig 4D is tailor-made for a customer’s individual needs, following in-depth consultation sessions. Thorough customizing is the order of the day with the wide variety of options available virtually endless, so as to significantly improve the sizing capabilities in your business. Delivering a cutting range of 5300 x 2100mm, the Striebig 4D comes with the option for cut depths of 80, 105 and 130mm.

Completely Autonomous: 

Once the panel is loaded, the 4D’s panel lowering and panel feeder units take care of all the material handling during cutting. The first intelligent cut optimization triggers an automatic cutting sequence, so operating the 4D is effortless. The operator simply loads the panels, presses the start button, removes the finished work pieces and positions them ready for further processing operations. Data can be entered via the intuitive touch screen or the 4D can be connected to customers’ own optimization software.

*TRK is the abbreviation for "Technische Richt-Konzentration" (Technical Target Concentration). These values have been applicable since July 1988 and specify the maximum permissible wood dust concentration at the workplace. The TRK value is 2 mg/m³ total dust based on a working average (shift) of 8 hours. Connection to an external dust extraction system is required. The system used must have an extraction performance of 20 m/sec. (vacuum approx. 2,000 Pa.) at the connector in order to meet the TRK specifications. 

The Striebig 4D represents the pinnacle in vertical panel saw technology. Effortless, one-person operation can optimize and cut a full-sized panel without the operator needing to re-handle it once it has been loaded on to the machine’s bed. Integrated intelligent cut optimization ensures fantastic levels of efficiency whilst minimising waste material, even for the most complicated panel and strip cutting work.

Features and Benefits:

• Full optimization ensures efficient material usage
• Automatic panel handling for ease of use, reduction of operator errors and prevention of damage to panel edges
• Low space requirements
• TRK* dust extraction limit values considerably below 1mg/m3
• Laser-supported display of the
• Automatic saw unit swivelling in
• vertical or horizontal cutting position
• Multilingual user interface
• Automatic saw unit plunging and withdrawal
• Electronic positioning system for horizontal cutting EPS
• Infinitely variable feed speed 10-25 m/min
• Digital measuring system DMS (both axes)
• 12” touchscreen colour display with touch&saw 2.0 operation
• Automatic saw beam locking with cutting point recognition
• Selectable saw cycle
• Automatic panel end recognition
• Pneumatic clutch for switching easily to manual mode
• Automatic riving knife movement

Premium Class Sawing Centre:

Each Striebig 4D is tailor-made for a customer’s individual needs, following in-depth consultation sessions. Thorough customizing is the order of the day with the wide variety of options available virtually endless, so as to significantly improve the sizing capabilities in your business. Delivering a cutting range of 5300 x 2100mm, the Striebig 4D comes with the option for cut depths of 80, 105 and 130mm.

Completely Autonomous: 

Once the panel is loaded, the 4D’s panel lowering and panel feeder units take care of all the material handling during cutting. The first intelligent cut optimization triggers an automatic cutting sequence, so operating the 4D is effortless. The operator simply loads the panels, presses the start button, removes the finished work pieces and positions them ready for further processing operations. Data can be entered via the intuitive touch screen or the 4D can be connected to customers’ own optimization software.

*TRK is the abbreviation for "Technische Richt-Konzentration" (Technical Target Concentration). These values have been applicable since July 1988 and specify the maximum permissible wood dust concentration at the workplace. The TRK value is 2 mg/m³ total dust based on a working average (shift) of 8 hours. Connection to an external dust extraction system is required. The system used must have an extraction performance of 20 m/sec. (vacuum approx. 2,000 Pa.) at the connector in order to meet the TRK specifications. 

Dewalt

• All products are covered by one year warranty (XR Lithium Ion range has three years warranty when tool is registered online)
• Call Dewalt's Service Centre on 01753500947 to be advised of your nearest Service Agent. Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Makita UK

• All 18 Volt products range are covered by three year warranty. (when tool is registered online)
• Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
• Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Festool

• All products are covered by Festool's extended three year warranty. (when tool is registered online)
• Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will arrange to have product repaired and returned to you.
• Product must have been registered online for the extended 3 year warranty (usually done by supplier)
• Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Trend

• All products are covered by one year warranty
• Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
• Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Scheppach

• All products are covered by one year warranty
• Call us on 0141 429 4444 or email sales@thesawcentre.co.uk and we will advise you of the repair process.
• Please keep your TSC receipt as proof of purchase must be produced.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Mafell

• All products are covered by Mafells 3 year warranty when the product is registered online at www.mafell-garantie.de/login.jsp
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Stihl

• All Stihl petrol machinery is covered by one year warranty.
• All Stihl petrol machinery is checked & tested at the point of purchase.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

Bosch

• All products are covered by Bosch one year warranty. Customer can register product online at Bosch to receive extended three year warranty.
• For any other information regarding warranties please email sales@thesawcentre.co.uk

For any other warranty queries please call 0141 429 4444

DELIVERY:

We aim to deliver every parcel within 48 hours from the date of ordering. Most of the time you will receive your parcel the following day if ordered before 2:30pm but sometimes things are outwith our control (traffic, road accidents, bad weather etc.) in these circumstances we ask that you be patient with us, if your delivery is late please call us and we will investigate the situation for you. Most parcels will be delivered by Parcelforce and may require a signature upon delivery.

We deal with many stockists and sometimes we rely on their delivery times to fulfil your order, we take every care to ensure that your product is delivered within the time stated we take no responsibility for third parties and will incur no liability for any late delivery. If you have any questions or concerns regarding the delivery of an item please call us.

Mainland UK

• Standard FREE delivery on orders over £80 + vat (excludes heavier items)
• £7.30 + vat for orders under £80 + vat
• Heavier goods* carriage will be added at checkout

Non Mainland UK & Northern Ireland

• Standard delivery charged at £14.95 (excludes heavier items)
• For Heavier goods please call 0141 429 4444 for pricing as this depends on geological location. Competitive pricing available.

Please note:

• For price and availability of industrial machinery call 0141 429 4444 or fill out the contact form.
• Stihl machinery is only available for collection only.
• Prices exclude VAT by default but you can change this by clicking on the VAT switcher at the top of the page if you want to see prices including VAT.

*Some heavier goods may still have free delivery, this will be stated at checkout.

RETURNS:

Terms and Conditions

• In the unlikely event that an item does not meet your expectations or is faulty or damaged when you receive it, you can obtain a replacement or full refund – provided the product is returned unused in its original packaging and includes any accessories provided as well as any items provided free of charge or as part of a package deal within 14 days of your purchase. Your statutory rights are not affected. Goods must be returned at customer’s expense unless otherwise agreed with a Saw Centre employee.