Charnwood W619 Cast Iron Table Saw 8″ Diameter Blade

The Charnwood W619 is a cast iron table saw with an 8″ diameter blade. Now available with an upgraded quick action precision rip fence. Supplied with 18 tooth TCT sawblade, sliding carriage, extension tables, floor stand, adjustable feet, push stick, 2.0m power cable and UK 3 pin plug.

Description:

• Quiet Induction Motor
• Cast Iron Precision Ground Table
• Extension Tables as Standard Equipment
• Sliding Carriage as Standard Equipment
• Separate Hand wheels for Blade Adjustment
• Quick Action Precision Rip Fence
• 100mm Dust Extraction Outlet
• Solid Floor stand Base Included
• Optional Wheel Kit Available
  
  

W619 Table saw is a compact, high quality table saw with a quiet induction motor. The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy. Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a joy to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts.

Supplied with 18 tooth TCT sawblade, sliding carriage, extension tables, floor stand, adjustable feet, push stick, 2.0m power cable and UK 3 pin plug.

There are 3 ways to configure the table saw:
The sliding carriage can be fitted on either side of the blade so that you can work on the left or right.
If you are not using the sliding carriage, you can fit one extension table on either side of the blade.

For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required.

Techncial Specification:

• Main Table Size: 530mm x 1000mm
• Maximum Ripping Width Using Fence: 730mm
• Crosscut Table Size: 400mm x 180mm
• Maximum Crosscutting Width: 600mm
• Max. Using Alternate Assembly: 700mm
• Blade Tilt: 90 – 45 degrees
• Cutting Depth at 90 degrees: 60mm
• Cutting Depth at 45 degrees: 47mm
• Blade Diameter: 200mm
• Blade Bore: 30mm
• Work Table Height: 860mm
• Mitre Guide T-Slot Width: 15/19mm
• Mitre Guide T-Slot Depth: 7mm
• Motor (induction): 1100w (1.5hp) / 240v
• No-Load Blade Speed: 4700 rpm
• Minimum Blade Width (Kerf): 2.6mm
• Assembled Dimensions (WxDxH): 1460 x 1010 x 1030mm
• Assembly Time Required: 60 Minutes (Needs 2 People)
• Shipping Dimensions 1 (WxDxH): 650 x 490 x 470mm
• Shipping Dimensions 2 (WxDxH): 640 x 420 x 240mm
• Shipping Dimensions 3 (WxDxH): 1040 x 180 x 80mm
• Minimum Door Access Width: 500mm
• Weight (Gross / Net): 92 / 85Kg
• Rating: Light Trade
• Product Guarantee: 5 Years