Charnwood W696 Dust Extractor With 1 Micron Cartridge Filter

The W696 is the best buy in the Charnwood Hobby range of wood dust and chip extractors, this amazingly low priced unit brings affordable dust control to the woodworking enthusiast.

Description:

It is a portable floor standing unit intended for the one-man workshop and can be connected to any bench top machine or floor standing machine such as bandsaws, planer thicknessers, table saws. The inclusion of the floor sweeping attachment means it can easily be used to clean up the workshop floor.

• Quiet Induction Motor
• Highly Portable
• Tough Powder Coated Paint Finish
• Transparent Collection Bag
• Quick Action Metal Bag Clamps
• 1 micron Cartridge Filter

The induction motor ensures that noise levels are kept to a minimum. Dust and chippings are all collected in the transparent collection bag which when full can either be emptied and refitted or disposed of and a replacement fitted. The extractor is finished in a tough paint job to keep its looks for many years.

The standard cloth filtration bag is replaced with a cartridge to increase the filtration performance down to a super fine, 1 micron particle size. The extra deep pleats in the filter material, increase the surface area of the filter so that there is no loss in air flow compared to the original cloth filter.

This allows the extractor to be used for operations which produce very fine dust such as sanding and cutting MDF. The particle size of fine woodworking dust is generally between 2 and 3 microns. Research shows 99% of wood dust, produced by machining softwood, hardwood or MDF, is within that range. The extractor can still be used with all the normal workshop machines which produce dust and chips, such as: bandsaws, table saws, planers, thicknessers and spindle moulders.

To ensure a long life without any deterioration in performance the filter includes an internal cleaning device. Gently rotating the handles after each use, moves the internal paddles which clean the inside of the filter and prevent clogging.

Supplied with steel fan, 2 metre length of our tough adjustable length hose, transparent plastic collection bag with quick release metal strap, floor sweep attachment, castors, NVR switch, 2.1m cable and plug.

The maximum running time for this machine is 2 hours without rest. If you are a professional user who needs continuous extraction, please see the equivalent machine in our professional range W796.

Please Note : Hose is Left Hand thread so for quick connector use 100QCL

Technical Specification:

Motor (Induction): 750w (1hp)
Voltage: 240v
Flowrate (cubic metres per hour): 1020m3/hour
Inlet Diameter: 100mm
Collection Bag Capacity: 70 Litres
Dimensions (WxDxH): 900mm x 390mm x 1570mm
Weight: 30kg
Assembly Time Required: 45 Minutes
Rating: Hobby
Product Guarantee: 5 Years