GRAULE AS-P 550 Automatic Notching Machine 3kW 400V 3 Phase
The GRAULE AS-P 550 Automatic Notching Machine comes with a hydro-pneumatic sawing unit feed for cutting aluminium profiles. There is also a digital readout for all 3 angles.
Two independently arranged sawing units enable various notches at the profile bar ends. Both saw blades can be swivelled within the range of +/- 45 degrees via a worm drive with a crank handle.
GRAULE AS-P 550 Automatic Notching Machine 3kW 400V 3 Phase
- GRAULE AS-P 550 Automatic Notching Machine with hydro-pneumatic saw unit feed and stationary profile support.
- Two independently arranged and angle-adjustable sawing units allow a wide variety of notches to be made at the end of the profile bar.
- Both saw blades can be swivelled within the range of +/- 45 degrees via a worm drive with a crank handle.
- The height of the notching is adjusted jointly by both sawing units.
- The profile fence is adjustable with pneumatic clamping of the profile.
- A spray attachment for the coolant is installed and activates whilst sawing.
- Precise ball bush guidance of the saw units on hardened and ground steel shafts.
- Electronic digital angle display for the three axes: Swivelling horizontal saw blade, Swivelling vertical saw blade and angle of the profile system on the support table.
- Digital counter display for notch height and notch depth.
- Stable grey cast iron construction of the machine parts.
Technical Specification
- Engines: 2 x 400 V / 3.0 kW
- Rpm: 2.800 U/min
- Sawblade diameter horizontal: 500 mm
- Sawblade diameter vertically: 550 mm
- Sawblade bore diameter: 50 mm
- Notching height: 210 mm
- Notching depth: 190 mm
- Notching width: 140 mm
- Feed: hydro-pneumatic
- Weight: 1200 kg
| MPN | ASP550 |
|---|---|
| Manufacturer | Graule |
| Voltage | Three Phase Voltage (380 - 415V) |
UK Mainland Delivery
We try our best to dispatch all stock orders same day on a on a next day service. Dispatch times may vary depending on your geographical location and items ordered.
For full terms and conditions please visit our Delivery & Returns page.
We have strived to maintain the lowest possible prices for delivery for our customers that we can, however rising courier costs have made this near impossible and these costs now exceed what we are charging. So for the first time in four years we are raising our delivery cost from £5.83 ex vat to £7.00 ex vat. We are also raising our minimum order value for free delivery from £50.00 ex vat to £75.00 ex vat. We hope that this does not affect your decision to purchase from our website, you will always receive the same high level of service that we offer all customers.
Stock orders received before 12pm Monday to Friday will be processed and dispatched the same working day (this excludes items that are made to order or sent direct).
Orders received after 12pm Monday to Friday will be processed and dispatched the next working day.
Standard delivery via courier is free for orders over £75.00 ex vat and under 30kg in weight.
Orders under £75.00 ex vat and 30kg in weight are subject to a standard £7.00 ex vat handling and packaging fee.
Orders over 30kg will be subject to courier or volumetric surcharges.
Orders sent direct from our suppliers are dispatched in accordance to supplier delivery terms.
| Supplier | Estimated Delivery Times |
|---|---|
| Laguna | 2 - 3 working days for light items, 7 - 10 working days for heavy items |
| Charnwood | 2 - 3 working days, Charnwood will contact you to arrange delivery |
| Mirka* | Wide Belts - Manufactured to order: 7 – 10 working days |
| SIA Abrasives* | Wide Belts - In stock belts: 2 - 3 working days Wide Belts - Manufactured to order: 7 – 10 working days Wide Belts - Out of stock belts: 4 - 6 weeks |
| Swedex | 1 – 2 working days for in stock products |
| Trend | 1 – 2 working days for in stock products |
| Calibre Tooling | 1 – 2 working days for in stock products |
| Marcrist | 1 – 2 working days for in stock products |
