Lamello Cabineo 8 M6 Starter Set with 80 Pieces
The Cabineo is a one-piece cabinet unit fitting and is installed into a drilled or routed shape. No edge drilling is necessary, the machining happens solely in the surface.
Lamello Cabineo 8 M6 Starter Set with 80 Pieces
The Cabineo is a one-piece cabinet unit fitting and is installed into a drilled or routed shape. No edge drilling is necessary, the machining happens solely in the surface.
Description:
The Cabineo 8 M6 connectors can be created with materials like aluminium, steel or high pressure laminates (HPL), as well as traditional board material.
Where the thread cannot be cut directly into the substrate, Lamello offers an insert for an even stronger joint. The insert nut is hammered into the dividing panel with a through hole, into which the Cabineo then engages from both sides. This generates an enormous clamping force.
In comparison with the standard cam and dowel fitting, the Cabineo offers more efficient production, faster installation and a higher clamping force. To top it off, there is no need for wooden dowels.
The concept of the fitting was designed to use a minimal amount of resources for a maximum of functionality.
The Cabineo offers considerate advantages in the whole process, including production, transport and installation. Installing the fitting into the workpieces and stacking them during the production process is possible without any protruding parts, which could damage the finished surfaces. This eliminates the packing of bags with fittings which would need to be delivered to the job site for installation.
Because the elements are already factory-installed, the person assembling doesn’t need to handle loose fittings supplied in a bag during installation. This speeds up the assembly considerably and additionaly helps in reducing possible mistakes.
The fitting is inserted into the routed shape on the surface. This can take place in production prior to transport or following transport at the final destination. The preinstalled screw inside the fitting is then screwed into a M6 tapped hole or insert nut, in the corresponding workpiece, using a ball-end allen key. The speed of the cordless drill joins the workpieces quickly and powerfully.
Technical Specification:
- Screw Length: 8mm
- Size: 33.8 x 16.5 x 10.8 mm
- Cutter: ø 12 mm or smaller
- Drill: ø 5 mm and ø 15 mm
- Material connector: Fibreglass reinforced plastic
- Installation tolerance longitudinal: ± 0.1 mm
- Tensile strength: 1700 N equivalent to 170 kg
| MPN | 186306 |
|---|---|
| Country of Manufacture | Switzerland |
| Manufacturer | Lamello |
| EAN Barcode | 7640149937534 |
UK Mainland Delivery
We try our best to dispatch all stock orders same day on a on a next day service. Dispatch times may vary depending on your geographical location and items ordered.
For full terms and conditions please visit our Delivery & Returns page.
Standard* delivery via courier is free for orders over £50 ex vat and under 30kg in weight.
Orders under £50 ex vat and 30kg in weight are subject to a standard* £5.83 ex vat handling and packaging fee.
Stock orders received before 12pm Monday to Friday will be processed and dispatched the same working day. Orders received after 12pm Monday to Friday will be processed and dispatched the next working day (excludes weekends). Standard delivery via courier is free for orders over £50 ex vat and under 30kg in weight. Orders under £50 ex vat and 30kg in weight are subject to a standard £5.83 ex vat handling and packaging fee. Orders over 30kg will be subject to courier or volumetric surcharges.
Orders sent direct from our suppliers are dispatched in accordance to supplier delivery terms.
Laguna: 2 - 3 days, delivery to UK mainland only. A Laguna rep will contact you by phone to arrange delivery that suits you.
Holzmann, Scheppach, Zipper and SIP: 2 - 3 days, delivery to UK mainland only, for Highlands and Islands a delivery surcharge may be applicable, call us on 0141 429 4444 to enquire before you order.
