Versatility and high machining quality with the SCM Olimpic K 360, the machine with the aim to be the new reference point in the market for entry level edge banders and complete with a rounding unit. Compact and easy-to-use due to its advanced technological solutions designed to ensure optimal panel finishing. It is simply the perfect edge bander for companies who require continuous and high quality edge banding of panels even though they may be different from one to another.

The use of "multiedge" machining heads with electronic axes allows the machine to be set up automatically to machine panels with 2 different radii, solid wood and thin edges.

Advantages

End cutting unit: cut and "radius" in a single operation.
Automatic and error free cutting of thick edges due to the particular system with two blades that allows the straight cutting of solid wood edges and the chamfering of the thin edges.

Rounding unit: edge angles finishing on straight and shaped panels.
Rounding of front and rear edge angle on straight, chamfered and post-formed panels. The operation is automatically carried out by the unit and grants an optimal finishing, without necessity of further machining.

Touch 7 Control: just a "touch" to use the machine.
Error free machining with the touch-screen display with its customised graphics that allows an intuitive and easy selection of the main machine functions.

Perfect results on all surfaces.
The controlled axes allow all intermediate positioning of the trimming and edge scraping groups, ensuring optimal edge banding even in the case of surfaces with different degrees of roughness or panels covered with protective film. These units allow the machining of 2 different radii, endless thin edges and solid wood (comp. K 360 HP T-ER1).

Features

• Automatic single-sided edge bander for the edge gluing with hot melt glue on straight panels, on the four panel sides, finishing and rounding-off of the panel corners.
• Main frame made of bended and welded steel plates to ensure a high rigidity structure.
• Top steel presser, complete with two rows of rubber coated wheels mounted on bearings and enclosure that covers the wheels. Manual adjustment of presser at machine infeed with positioning numerical readout.
• Top operating groups fixed to the presser or mechanically connected on to it to allow the automatic positioning according to the panel thickness. Lower groups fixed to the horizontal beam for a precise reference with respect ot the panel. All frequency motors equipped with inverter.
• Safety enclosure on the entire length of the machine with poli-carbonate windows for the groups visualisation during machining.
• Exhaust outlets for the operating groups positioned on the top side of the safety enclosure.
• Mobile control panel at machine infeed for an easy use from the operator's working position.
• Electrical cabinet positioned inside the main frame with door that allow an easy access in case of any maintenance operations. The cabinet is in conformity with the current safety regulations.
• Feed track made of pads coated with high friction rubber fixed on n 3/4" industrial chain. Sliding of pads on two guideways, one round and one flat, to ensure straightness of movement and resistance to side loads. Manual pads lubrication.
• Panel support rollers positioned parallel to the track. It can be extended on the entire lengh of the machine. It is made of telescopic opening system and panel sliding plastic wheels with steel pivot pins.
• Safety regulations. The machine is in conformity with the safety regulations according to the countries of machine destination.

Basic Machines

• R0.02.00: Olimpic K 360 E (22)
• R0.02.01: Olimpic K 360 T-E (28)
• R0.02.02: Olimpic K 360 ER1 (34)
• R0.02.03: Olimpic K 360 T-ER1 (34)
• R0.00.21: Olimpic K 360 HP T-ER1 (38)

Machine Compositions

The machine includes the free space for the installation of the following optional groups:

• (1/2): Glue scraping unit
• (1S): Brushing unit

SCM Olimpic K 360 E - Composition (22)

SCM Olimpic K 360 T-E - Composition (28)

SCM Olimpic K 360 ER1 - Composition (34)

SCM Olimpic K 360 T-ER1 - Composition (34)

SCM Olimpic K 360 HP T-ER1 - Composition (38)

Profiles for "Round 1"

Technical Specification:

• Track feed speed: 11 m/min
• Panel thickness: 8 - 60 mm
• Thickness of edges in strips: 0.3 - 6 mm
• Thickness of rolled edges: 0.3 - 3 mm
• Max. section of rolled edges: 135 mm²
• Coil-holder plate diameter: 780 mm
• Exceeding material to the panel thickness: 2 + 2 mm
• Distance between two successive panels: 600 mm
• Minimum panel length (100 mm min. width): 140 mm
• Min. length of edge in rolls: 180 mm
• Min. length of edge in strips: 220 mm
• Min. panel width (210 mm min. length): 90 mm
• Opening for panel support roller: 500 mm
• Worktable height: 900 mm

RT-V1 PRE-MILLING UNIT:

• Max. removal: 60 mm²
• Max thickness removal: 3 mm
• Panel thickness(with H=64mm tool): 8-45 (60)
• Motors power: 1.5 kW
• Tool diameter: 100 mm
• Tool height: 49 mm
• Tool rotating speed: 9000 rpm

VC-VM POT UNIT:

• Installed power: 3 kW
• Heating time: 12 min
• Glue pot capacity: 1.5 kg

K-2 RADIUS END CUTTING UNIT:

• Motors power: 0.2 kW
• Speed of cutters: 12000 rpm
• Blades tilting: fixed

R-K TRIMMING UNIT:

• Motors power: 0.55 kW
• Speed of cutters: 12000 rpm
• Exceeding edge with reference to the panel thickness: 2 + 2 mm
• Min. panel thickness with radius: 12 mm
• Vertical/front copying devices: disc / wheel
• Knives radius: 2 mm

R-HP MULTIEDGE TRIMMING UNIT:

• Motors power: 0.65 kW
• Speed of cutters: 12000 rpm
• Exceeding edge with reference to the panel thickness (5 mm with 3 mm maximum edge thickness): 2 + 3 mm (5 mm)
• Min. panel thickness with radius: 10 mm
• Vertical front copying devices: disc / disc
• Knives radius: 2 mm

ROUND 1 MULTIEDGE ROUNDING UNIT:

• Motor power: 0.35 kW
• Speed of cutters: 12000 rpm
• Panel thickness: 10 - 45 mm
• Minimum panel length: 280 mm
• Distance between two successive panels: 750 mm
• Vertical/front copying pads: pad / pad
• Knive radius: 2 mm

RAS-V EDGE SCRAPING UNIT:

• Minimum panel thickness: 12 mm
• Vertical front copying discs: disc / disc
• Knives radius: 2 mm

RAS-HP MULTIEDGE EDGE SCRAPING UNIT:

• Minimum panel thickness: 10 mm
• Vertical / front copying discs: disc / disc
• Knives radius: 2 mm

SP-V BRUSHING UNIT (option):

• Motors power: 0.13 kW
• Speed of cutters: 1400 rpm