Stihl MS 400 C-M Forestry Petrol Chainsaw 20 inch Bar 66.8cc
World's first chainsaw with magnesium piston technology
The new 2-MIX engine provides 4kW of power,compared to 3.5kW in the MS 362 C-M, as well as more torque – 4.1 Nm vs 3.5 Nm. These increases come from larger displacement of 66.8cc, which is a 14% increase compared to the MS 362 C-M.
Stihl MS 400 C-M Forestry Petrol Chainsaw 20 inch Bar 66.8cc
World's first chainsaw with magnesium piston technology
The new MS 400 C-M is the world’s first chainsaw with a magnesium piston. The MS 400 C-M chainsaw has been designed with professionals in mind, offering STIHL’s highest performance in the 60cc class. More displacement, more power, more torque, only a small weight increase compared to the MS 362 C-M and an outstanding power to weight ratio. The new 2-MIX engine provides 4kW of power,compared to 3.5kW in the MS 362 C-M, as well as more torque – 4.1 Nm vs 3.5 Nm. These increases come from larger displacement of 66.8cc, which is a 14% increase compared to the MS 362 C-M. The magnesium piston is also 14% lighter than the aluminum piston in the MS 362 C-M, helping ensure rapid acceleration. Thanks to these intelligent design features, the MS 400 C-M has an impressive power-to-weight ratio of 1.45 kilograms per kilowatt, making it ideal to use when working in the forest, especially over prolonged periods. The powerhead on it’s own weighs 5.8 kg. In addition to the new 66.8 cc engine, the MS 400 C-M features STIHL’s latest M-Tronic 3.0 technology which has STIHL’s simple re-calibration procedure and an improved HD2 filter, which all help deliver optimum performance from the saw at all times. The chainsaw also features Elastostart technology that enables effortless starting of the tool. Designed for forestry and arb professionals, the MS 400 C-M can be used for a range of applications, including felling, de-limbing and cutting timber down to size.
Standard Features:
STIHL M-Tronic (M)
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
STIHL 2-MIX-Engine
1-in-4 channel technology. The economical STIHL 2-MIX engine with 1-in-4channel technology features a high torque over a wide speed range. The chainsaw provides fuel savings of up to 20% compared to STIHL two-stroke engines in the same performance class without 2-MIX technology. Exhaust emissions are reduced by up to 50%.
HD2 filter
The HD2 filter is made from polyethylene filter material with up to 70% finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
Decompression valve
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.
STIHL ElastoStart
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.
Side chain tensioner
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Technical Specification:
- Bar length: 40-50 CM
- Bar length: 16-20 "
- Displacement: 66.8 cm³
- Displacement: 4.08 cu-in
- Power output: 4/5.4 kW/HP
- Engine power: 5.4 bhp
- Weight: 5.8 kg 1)
- Weight: 12.8 lb 1)
- Power-to-weight ratio: 1.45 kg/kW
- System weight: 6.88 / 6.97 / 7.07 / 7.13 kg 2)
- Sound pressure level: 107 dB(A) 3)
- Sound power level: 118 dB(A) 3)
- Vibration values left/right: 3.5/3.5 m/s² 4)
- Saw chain pitch: 3/8 "
- CO2: 656 g/kWh
1)Without fuel, without bar and chain 2)Without fuel, with bar and chain 3)K-factor according to DIR 2006/42/EC = 2.5 dB (A) 4)K-factor according to DIR 2006/42/EC = 2m / s ²
MPN | 1140 200 0471 |
---|---|
Country of Manufacture | Germany |
EAN Barcode | 886661544486 |
Manufacturer | Stihl |
Power Source | Petrol Machinery |
UK Mainland Delivery
We try our best to dispatch all stock orders same day on a on a next day service. Dispatch times may vary depending on your geographical location and items ordered.
For full terms and conditions please visit our Delivery & Returns page.
Standard* delivery via courier is free for orders over £50 ex vat and under 30kg in weight.
Orders under £50 ex vat and 30kg in weight are subject to a standard* £5.83 ex vat handling and packaging fee.
Stock orders received before 12pm Monday to Friday will be processed and dispatched the same working day. Orders received after 12pm Monday to Friday will be processed and dispatched the next working day (excludes weekends). Standard delivery via courier is free for orders over £50 ex vat and under 30kg in weight. Orders under £50 ex vat and 30kg in weight are subject to a standard £5.83 ex vat handling and packaging fee. Orders over 30kg will be subject to courier or volumetric surcharges.
Orders sent direct from our suppliers are dispatched in accordance to supplier delivery terms.
Laguna: 2 - 3 days, delivery to UK mainland only. A Laguna rep will contact you by phone to arrange delivery that suits you.
Holzmann, Scheppach, Zipper and SIP: 2 - 3 days, delivery to UK mainland only, for Highlands and Islands a delivery surcharge may be applicable, call us on 0141 429 4444 to enquire before you order.