Buying a "L'invincibile si 3" machine means you get a customized solution, thanks to experience, technical research and Italian creativity.

Advantages

• 10 years guarantee for the carriage sliding system
• Aluminium alloy carriage sliding on high precision "arch-formed" hardened steel guides, which are fixed on the carriage by means of mechanical bending system
• "EASY TOUCH 7" electronic control
  complete with:
  
  • CPU ARM, 7” colour flat screen
  • Direct control of the following working axes with manual, manual incremental, semiautomatic, automatic mode:
    
    • main blade lifting
    • saw blades unit tilting,
    • parallel fence movement,
    • scoring blade lifting and lateral movement (with automatic
      activation into working position when switching on the blades and automatic
      exclusion when switching off the blades)
    • number of blade rpm on machine equipped with inverter (option on SI3 and SI5
      standard on SIX)
    • memory capacity up to 999 working programs of the controlled axes
    • programming of sequential measures of the execution of 6 cuts maximum with
      a single program
  • – Operator assistance with graphic help for the solution of eventual working unknown:
    development and selection of the dimensional measures, working angles both on the
    worktable fence and the blade, referred to single elements of a compound piece
  • – Tools data-base
• Operator's assistance function on electronic control
  complete with:
  
  • selection of the stop correct positioning on the squaring fence when carrying out cuts with tilted blade
  • selection of the stop correct positioning on the fence when carrying out cuts with angled fence on the worktable, with or without tilted blade
• Overhead mobile control panel
• Independent powered scoring unit
• 53.03.40: Expandable scoring blade
  
  • Min. / max. thickness: 2.8 / 3.6 mm
  • Blade diameter: 120 mm
  • Bore diameter: 20 mm
  • Number of teeth: 24
• Programmed parallel fence with sliding on THK guide controlled axis complete with movement through recirculating ball screw, 25 mt/min max. speed.
  
  • exclusion of fence under worktable, cutting width on the parallel fence, 1500 mm
• Electronic scoring unit adjustment for the motor-powered movement of the horizontal and vertical positioning of the scoring blade
  
  • automatic activation into working position when switching on the blades
  • automatic exclusion when switching off the blades
• Arm support for squaring frame with sliding on ballbushing prismatic linear guides
• Squaring frame with "CompeX" device for angular cutting with automatic self-adjustment of the stop position
  
  • This exclusive system allows the functioning even when the optional fence for complementary cuts is applied
• Motor start/stop pushbuttons integrated in the sliding carriage
• Eccentric clamp
• Versions with 3200 mm sliding carriage

Safety Equipment

• Emergency pushbuttons located on the front machine side and on parallel fence side
• Direct start main motor with pushbuttons 
• Overload protection
• Overhead saw guard with incorporated dust extraction, 100 mm outlet diameter
• Auxiliary low voltage circuit (110 volts)
• Automatic brake on main motor
• Blade access door with safety microswitch and quick locking
• Certificate of conformity with "C.E. Standards"

Technical Specification

• 57.03.17: "EASY TOUCH 12" electronic control 12” colour flat screen
• 57.03.18: Ripping capacity on parallel fence 1000 mm
• 57.03.44: Squaring frame with "Quick Lock" fence
  with simultaneous positioning and locking/unlocking on the frame. It is complete with the roller for workpiece support of 2400 mm from the blade
  
  • N.B.: A fence for angular cutting is compulsary
• 53.01.00: Versions with 3800 mm sliding carriage. Squaring capacity with scorer 3800 mm
• 57.03.45: Sliding carriage length 2200 mm. Squaring capacity with scorer 2200 mm
• 57.03.41: Surface reinforcement treatment for sliding table and mobile crossbars of squaring frame dedicated to the intensive processing and particularly abrasive materials
  
  • N.B.: Not available for "Sliding carriage length 2200 mm"
• 57.02.86: Cast-iron table extension
• 57.00.42: Squaring fence with no. 3 LCD readouts for stops position. Each stop is equipped with electronic digital readout with detecting system on magnetic band and readout on LCD display
• 53.01.23: Fence for angular cutting on sliding carriage
  complete with extended stop for cutting sizes up to 1500 mm
• 57.00.44: Fence for angular cutting
  with self-adjustment of the stop position in respect of the blade, irrespective of the angles used, complete with aluminium fence with stop for sizes up to 1500 mm.
• 53.01.01: Device for angular cuttings with electronic readouts
  with self-adjustment of the stop position in respect of the blade, irrespective of the angle used.
  
  • Aluminium fence with stop for sizes up to 1500 mm. Independent electronic readouts of stop position and rule tilting angle. Detecting system on magnetic band and readouts on LCD
    display.
• 53.01.30: "Full Support & Wireless"
  
  • Mobile frame for angular cutting complete with Wireless function with manual movement and possibility of angle from +50° to -50° in respect of the perpendicular to the cutting axis, with micrometric adjustment. Angle detecting system on magnetic band and readout on LCD display, updating in real time of the squaring stops positions on LCD readout when varying the blade and/or cutting angle tilting
  • N.B.: The code 57.00.42 “Squaring fence with 3 LCD readouts for stop positioning” is already included.
• 57.03.10: Fence for complementary cuttings to be applied to the squaring fence supplied as standard feature
• 53.01.03: Support carriage for "Full Support" for an easy removing. It is equipped with wheels and mechanical lifting by means of handwheel
• 57.00.45: Fence for parallel cutting on the sliding carriage
  utilizing the carriage, complete with millimetric rule, extended stop for cutting sizes up to 1000 mm and millimetric reference system for the first trim cut.
• 53.01.12: Fence for parallel cutting ont the sliding carriage with LCD display complete with electronic digital readout with detecting system on magnetic band and readout on LCD display. It is equipped with extended stop for cutting sizes up to 1000 mm and millimetric reference system for the first trim cut.
• 53.01.17: Presser on entire carriage length complete with no. 2 pneumatic pressers with centralized control
  
  • 3030 mm with 3200 sliding carriage
  • 3650 mm with 3800 sliding carriage
• 53.01.18: Second support frame with sliding rail for supporting panels of large dimensions
• 57.02.71: Inverter for electronic speed change from 2700 to 6000 rpm with electronic automatic start for main motor:
  
  • spindle speed selection from NC
  • blade speed control from NC with reference to the blades data base
  • electronic motor brake
  • 3 phase motor power 9kW (12hp) 50Hz
• 97.04.68: 3 phase motor power 9kW (12hp) 50Hz complete with automatic star-delta start
• 57.03.35: "Pro-Lock" system for the main blade rapid locking with fast and tool-less riving knife adjustment
• 57.03.36: "DADO" machining Mechanical presetting to use a tool (not included) in place of the main blade.
  
  • 203mm/8” max. diameter
  • 30mm internal diameter
  • 20mm maximum thickness
  • 40mm max working depth
  • N.B.: For NOVA SI 300, NOVA SI 300S and CLASS SI 300 in CE version it is compulsory to select the option“overhead sawblades protection”.
• 57.02.87: SAV€NERGY Intelligent system for the management of the machine's energy consumption in order to eliminate any wastage.
  
  • N.B.: The inverter option is compulsory
• 57.03.42: Additional eccentric clamp

Advanced Materials Processing

• 53.03.30: Machine configuration for the machining of advanced materials. This configuration makes the machine suitable also for the machining of cork, stiff rubber or plastic and plastic-coated plywood. Metals and cement-wood base composite are excluded.
  
  • N.B.: For material which are not included in the list: due to the high variety of the extra-wood market, prior to engaging in the offer of a technical solution it is compulsory to send to SCM some material samples to carry out a proper check
  • ATTENTION: It is advisable the use of extraction systems equipped with chips trapping devices in order to avoid that these will damage the extraction system. According to the type of material to be machined it is compulsory to equip the machine with a suitable tool.
  • Advisable options:
    
    • - Inverter to vary the electronic speed 2700-6000 rpm
• 53.03.16: Device for the blade micro-lubrication to machine plastic materials and light alloys of aluminium and brass with quantity adjusting system of the sprayed liquid lubrication
  
  • N.B.: - The device is compulsory for the machining of light alloys of aluminum and brass, particularly useful with certain plastic materials.