Buying a "L'invincibile" machine means you get a customized solution, thanks to experience, technical research and Italian creativity.

Discover the "Xylent" cutterhead, available for this machine.

Advantages

Precision that lasts a lifetime without noise
With the system on connecting rods. The system guarantees the maximum movement fluidity and avoids deformations of the work table. This guarantees maximum stability, reliability and ergonomics.

One machine for every requirement with the interchangeable rollers
Quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as minimum removal of fine wood and/or batches where multiple pieces of different thicknesses are processed.

Perfect finish with the feeding rollers on connecting rods.
The stopping of the work piece and the presence of notches on its surface are eliminated  due to the movement system on all three rollers that allows their vertical displacement by rotation and the best linear feeding.

Sturdy structure with precision when moving the work table
The 4 screws with a large diameter combined with the 2 side linear guides ensure worktable stability eliminating the necessity of  locking in position. The integrated protections guarantee high precision and reliability over time.

Standard Equipment

• Manual movement of infeed surface table by means of parallelogram system on connecting rods with readout of cutting depth on scale
• Simultaneous lifting and locking of surface tables complete with mechanical safety device
• Speedy setting up for changeover from surfacer to thicknesser (CE version), complete with lifting of surface table and automatic positioning of exhaust hood by means of pneumatic system
• "READY" electronic control complete with management of the thicknessing table positioning
• Thicknessing table with vertical moving by means of 4 steel screws
• Rubber coated outfeed roller
• Interchangeable feed rollers
• Infeed sectioned pressers
• Cutterblock and knife setting device
• Automatic star delta start on main motor
• 3 phase motor 9kW 12hp 50Hz
• Service kit for use and maintenance

Safety Equipment

• Safety microswitch for correct positioning of surface tables and/or thicknesser chips conveyor
• Bridge type planer protection (CE version)
• Automatic brake on motor
• Overload switch protection
• Auxiliary 110V low voltage circuit 
• Emergency pushbutton
• Padlockable main switch
• Certificate of conformity "CE Standards" (CE version)

Technical Specification

• Working width: 520 mm
• Tersa cutterblock diameter: 120 mm
• number of standard Tersa knives: 4
• Total length of surface work tables: 2310 mm
• Min. / max. working height on thicknesser: 3.5 / 250 mm
• Three-phase motors starting from: 9 kW 50 Hz / 11 kW 60 Hz

 Optional Extras

• 34.02.15: Tersa type cutterblock with throwaway knives
• 57.03.23: Xylent spiralknife cutterblock with 3 series of knives (15 x 15 x 2.5mm)
• 57.03.27: Xylent maintenance kit
• 57.03.28: 10 spare inserts for Xylent spindle (15 x 15 x 2.5mm)
• 32.01.25: Thicknessing table with 2 idle rollers
• 32.02.11: First sectioned feed roller in steel
• 24.06.15: Additional overturning fence for processing of thin workpieces

Accessories for L'invincible Planers

The following accessories allow the customisation of the machines composition "after sale" therefore they can only be purchased separatel from the machine. It is advisable to supply the serial number of your machine to avoid incompatibility issues.

• 88.81.03: Additional overturning fence for processing of thin workpieces
• 88.80.07: Top feed roller with rubber coating 520mm
• 88.80.63: Xylent maintenance kit
• 88.80.64: 10 spare inserts for Xylent spindle (15 x 15 x2.5mm)