Sales and Service: 0141 429 4444
Follow Us
My Cart ( )
Toggle Nav

SCM L'invincibile S 7 Thicknessing Planer

SKU: S7
Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM L'invincible S 7 Thicknessing Planer. Buying a "L'invincibile" machine means you get a customized solution, thanks to experience, technical research and Italian creativity.

Buying a "L'invincibile" machine means you get a customized solution, thanks to experience, technical research and Italian creativity.

Discover the "Xylent" cutterhead, available for this machine.

Advantages

The best finish
Effectiveness of the feeding of any material and in any working condition thanks to the pneumatic adjustment. The unique ability to differentially set the pressure on the infeed and outfeed rollers, allows to change at any time the pressure exerted on the work piece.

One machine for every requirement
With the interchangeable rollers its a quick and easy changeover that allows the operator to configure the machine drive function in case of special requirements such as minimum removal of fine wood and/or batches where multiple pieces of different thicknesses are processed.

Best finish at maximum speed
With the electronic adjustment of the feed speed.

Feeding rollers on connecting roads
Gives the perfect finish. The stopping of the work piece and the presence of notches on its surface are eliminated due to the movement system on all three rollers that allows their vertical displacement by rotation and the best linear feeding.

Standard Equipment

  • Powered lifting of thicknessing table, 2 speeds with micrometric adjustment
  • Electronic digital readout of working height with decimal control
  • Variable feed speeds of workpiece, electronically controlled by means of inverter from 4 to 20 m/min
  • Thicknessing table with vertical moving by means of 4 steel screws
  • 1st front roller in helicoidal steel
  • 2 outfeed top feed rollers with rubber coating
  • Interchangeable feed rollers
  • 3 phase 7kW (9.5hp) 50Hz motor with manual star-delta start (CE versions)
    • N.B.: The machine has to be electrically connected to the neutral power

Safety Equipment

  • Soundproof infeed and outfeed barrier
  • Safety microswitch on protection hood
  • Emergency pushbutton on the front/rear machine side
  • Padlockable main switch
  • Overload switch protection
  • Auxiliary low voltage circuit (110 volts)
  • Automatic brake on motor (CE Version)
  • Certificate of conformity "C.E. Standards"

Technical Specification

  • Cutterhead working width: 630 mm / 25 inches
  • Cutterblock diameter: 120 mm
  • Cutterblock speed: 4500 rpm
  • Number of standard knives: 4
  • Standard knives dimensions: 640 x 35 x 3 mm
  • Max. stock removal: 8 mm
  • Worktable dimensinos: 640 x 1000 mm
  • Adjustable feed speed: 4 to 20 m/min
  • Min. / max. thicknesser working height: 3.5 - 300 mm / 0.14 - 12 inches
  • Min. thicknesser working length: 260 mm
  • Three-phase motor: 9 kW (12 hp) 50 Hz
  • Feed motor power: 1.3 kW
  • Exhaust hood diameter: 150 mm

Optional Extras

  • 53.03.09: First infeed top feed roller with rubber coating,
    alternative to the toothed steel roller
  • 53.03.10: First infeed top feed roller with sectioned steel
    for varying thicknesses
  • 53.03.11: First infeed roller coated with 2 different types of rubber
    for varying thicknesses
  • 53.03.13: Thicknessing table with 2 idle rollers
    • N.B.: It is advisable for heavy duty woodworking operations when moist or resinous wood is processed.
  • 53.03.14: "TERSA" type cutter block with throwaway knives,
    complete with 1 set of knives
  • 57.03.24: "Xylent" spiralknife cutterblock with 105 knives (15 x 15 x 2.5mm)
  • 57.03.27: Xylent maintenance kit
  • 57.03.28: 10 spare inserts kit (15 x 15 x 2.5) for Xylent spindle
  • 53.02.28: Outfeed table extension (630 x 1200 mm dimensions)
    complete with automatic pneumatic locking

Advanced materials processing

  • 53.03.25: Machine configuration for the machining of advanced materials. This configuration makes the machine suitable for the machining of cork, stiff rubber or plastic and plastic-coated plywood. Metals and cement-wood base composite are excluded.
    • N.B. For material which are not included in the list:
      Due to the high variety of the extra-wood market, prior to engaging in the offer of a technical solution it is compulsory to send to SCM some material samples to carry out a proper check
    • ATTENTION:
      It is advisable the use of extraction systems equipped with chips trapping devices in order to avoid that these will damage the extraction system. The machine configuration foresees:
      • Electronic adjustment of the feed speed by means of inverter that is reduced to: 2 to 10 m/min
        – Maximum stock removal: 5 mm
        – Reading system of the machine workpiece that automatically limits the feed speed to the minimum with thicknesses lower than 10 mm
      • Advisable options:
        - First upper rubber-coated feeding roller at infeed
        N.B. It is not available in combination with:
        - First infeed top feed roller with sectioned steel
        - First infeed roller coated with 2 diff. types of rubber
        - Outfeed steel top feed rollers instead of the rubber-coated ones
  • 53.03.15: Electronic adjustment of the feed speed by means of inverter 1 to 5 m/min to obtain a better finishing of the more delicate materials
    • N.B.: It is compulsory to select the “machine configuration for the machining of extra wood materials” option
More Information
MPN R0.20.17
Country of Manufacture Italy
Manufacturer SCM L'invincibile
Write Your Own Review
You're reviewing:SCM L'invincibile S 7 Thicknessing Planer

UK Mainland Delivery

We try our best to dispatch all stock orders same day on a on a next day service. Dispatch times may vary depending on your geographical location and items ordered.

For full terms and conditions please visit our Delivery & Returns page.


Standard* delivery via courier is free for orders over £50 ex vat and under 30kg in weight.

Orders under £50 ex vat and 30kg in weight are subject to a standard* £5.83 ex vat handling and packaging fee.

Stock orders received before 12pm Monday to Friday will be processed and dispatched the same working day. Orders received after 12pm Monday to Friday will be processed and dispatched the next working day (excludes weekends). Standard delivery via courier is free for orders over £50 ex vat and under 30kg in weight. Orders under £50 ex vat and 30kg in weight are subject to a standard £5.83 ex vat handling and packaging fee. Orders over 30kg will be subject to courier or volumetric surcharges.

Orders sent direct from our suppliers are dispatched in accordance to supplier delivery terms.

Laguna: 2 - 3 days, delivery to UK mainland only. A Laguna rep will contact you by phone to arrange delivery that suits you.
Holzmann, Scheppach, Zipper and SIP: 2 - 3 days, delivery to UK mainland only, for Highlands and Islands a delivery surcharge may be applicable, call us on 0141 429 4444 to enquire before you order.

Upsell Products

Sedgwick PT255 Planer Thicknesser 255 x 180mm

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

Sedgwick MB308 Planer Thicknesser 308 x 230mm

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

Sedgwick CP410 Planer Thicknesser 410 x 230mm

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Minimax FS 30C Combined Surfacing Thicknessing Planer

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Minimax FS 41ES Combined Surfacing Thicknessing Planer

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Nova FS 410 Combined Surface Planer Thicknesser

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM L'invincibile FS 7 Combined Surface Planer Thicknesser

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Minimax S 41ES Thicknessing Planer

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Nova S 520 Thicknessing Planer

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.

SCM Class S 520 Thicknessing Planer

Availability and delivery may vary. Speak to one of our advisors by calling 0141 429 4444 or request a quote.