Guaranteed quality at your finger tips. Easy and precise, practical design, a wider range of applications.

Discover the "Xylent" cutterhead, available for this machine.

Advantages

One machine for every requirement with the interchangeable rollers.
Quick and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as minimum removal of fine wood and/or batches where multiple pieces of different thicknesses are processed.

Perfect finish with the feeding rollers on connecting roads.
The stopping of the work piece and the presence of notches on its surface are eliminated due to the movement system on all three rollers that allows their vertical displacement by rotation and the best linear feeding.

Sturdy structure with precision when moving the work table
The 4 screws with a large diameter combined with the 2 side linear guides ensure worktable stability eliminating the necessity of  locking in position. The integrated protections guarantee high precision and reliability over time.

Exceptional finish with the “Xylent” spiral knife
Reduced noise during machining provides a more comfortable working environment. It also improves the dust extraction due to the production of very small chips. Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore increasing the production life of the cutter block before knives require replacement.

Standard Equipment

• Powered lifting of thicknessing table table, 2 speeds with micrometric adjustment
• Numerical readout of working height with decimal control
• Thicknessing table with vertical moving by means of 4 steel screws
• First front roller in helicoidal steel
• Interchangeable feed rollers
• 3 phase motor 7kw (9.5hp) 50Hz with manual star delta start

Safety Equipment

• Soundproof infeed and outfeed barriers
• Emergency pushbutton on front of machine
• Emergency pushbutton on rear or machine (CE version)
• Safety microswitch on protection hood (CE version)
• Padlockable main switch
• Overload switch protection
• Auxiliary low voltage circuit
• Automatic brake on motor (CE version)
• Certificate of conformity "CE Standards" (CE version)

Technical Specification

• Cutterhead working width: 520 mm / 20 inches
• Cutterblock diameter: 120 mm
• Number of standard Tersa knives: 4
• Standard Knives dimensions: 520 x 35 x 3 mm
• Max. stock removal: 8 mm
• Worktable dimensinos: 530 x 900 mm
  
• Thicknesser feed speed: 5, 8, 12 or 18 m/min
• Min. / max. thicknesser working height: 3.5 - 300 mm / 0.14 - 12 inches
• Min. thicknesser working length: 220 mm
• Min. thicknesser working width: 10 mm
• Three-phase motor: 7 kW (9.5 hp) 50 Hz
• Exhaust hood diameter: 150 mm

Optional Extras

• 57.0.38: Worktable with 2 idle rollers
  • N.B.: This option is advisable for heavy duty woodworking operations where moist or resinous wood is ebeing processed
• 57.01.39: First infeed sectioned steel feed roller, an alternative to the helicoidal roller
• 57.00.73: Third feed roller rubber coated and power driven
• 57.02.36: Steel outfeed roller/s instead of the rubber-coated steel roller/s
  • N.B.: The option is exclusively suggested for machining not requiring particular finishing accuracy (i.e. heavy carpentry, packings, sofas frames).
  • Together with this option it is advisable to foresee the thicknessing table with two idle rollers.
• 57.01.40: "TERSA" type cutter block with throwaway knives complete with one set of knives
  • N.B.: Increased power is recommended on main motor for heavy removal
• 57.03.23: "Xylent" spiralknife cutterblock with 84 knives (15 x 15 x 2.5mm)
• 57.03.27: Xylent maintenance kit
• 57.01.70: 3 phase motor 9kW 12 HP 50Hz with automatic star-delta start